user message limits
by LC Bruzenak
I know I can go look at the code, however I figured I'd ask here first
about the limits on the user message in both audit_log_user_message and
ausearch.
With audit_log_user_message the maximum length allowed appears to be
around MAX_AUDIT_MESSAGE_LENGTH-100. I think it may depend on the
executable name length (and other stuff auto-pushed into the string)
which is why I say "around".
Even when I get a successful return value (from audit_log_user_message),
I don't get my string back out in "ausearch" unless it is WAY smaller -
~1K or less I think.
Any ideas/thoughts?
This is the latest (1.7.11-2) audit package.
Thx,
LCB.
--
LC (Lenny) Bruzenak
lenny(a)magitekltd.com
11 years, 9 months
AUDIT_SIGNAL_INFO
by Matthew Booth
Under what circumstances will the RHEL 4 kernel generate a message of
type AUDIT_SIGNAL_INFO? My understanding is that it should be sent when
a process sends a signal to the audit daemon, however I have not
observed that. Any ideas?
Thanks,
Matt
--
Matthew Booth, RHCA, RHCSS
Red Hat, Global Professional Services
M: +44 (0)7977 267231
GPG ID: D33C3490
GPG FPR: 3733 612D 2D05 5458 8A8A 1600 3441 EA19 D33C 3490
13 years, 1 month
Near Term Audit Road Map
by Steve Grubb
Hi,
With the proposals sent to the list, I wanted to talk about how this might
play out code-wise. With regard to the current code base, I am working on a
1.8 release. This would represent finishing the remote logging app and
nothing more. The 1.8 series would become just an update series just like the
1.0.x series did.
In parallel with finishing remote logging, I would release a 2.0 version.
Patches applied to 1.8 would also be applied to 2.0. A 2.1 release would
signify the completion of remote logging that branch. I would recommend this
branch for all distributions pulling new code in.
The 2.0 branch will also have a couple more changes. I want to split up the
audit source code a little bit. I want to drop the system-config-audit code
and let it become standalone package updated and distributed separately.
I also want to drop all audispd-plugins in the 2.0 branch and have them
released separately. They cause unnecessary build dependencies for the audit
package.
During the work for a 2.2 release, I would also like to pull the audispd
program inside auditd. In the past, I tried to keep auditd lean and single
purpose, but with adding remote logging and kerberos support, we already have
something that is hard to analyze. So, to improve performance and decrease
system load, the audit daemon will also do event dispatching.
Would this proposal impact anyone in a Bad Way?
Thanks,
-Steve
13 years, 1 month
Re: excluding auditd events
by Mr Dash Four
> That would be "user,never". The audit daemon does no filtering. Its in a race with the
> kernel to put events to disk before the kernel's backlog overflows.
>
Yeah, that's it, sorry. Is this backlog configurable (maybe in the same
way tcp/udp buffers are via the sysctl daemon)?
> The user filter can filter on: pid, uid, gid, auid, and any part of the subject's
> selinux label. The only thing not being filtered on that is available is the event's
> record type. There are no other attributes available that can be filtered on.
>
You mean the message type? If so, filtering by selinux label and message
type is sufficient, at least for my immediate needs.
> It is protected by file permissions. You must be root to write to the file. If you want
> to gpg armor your files when you archive them, its possible to script that.
Actually, I was thinking more of having a hash against each record
(horizontally) and, maybe a separate hash over the current tuple of
time:audit count (vertically).
It was just an idea and is similar to what I have implemented in my
database-based log system (using PostgreSQL) - a token (via smartcard)
is taken when the logging starts (at boot up using dracut - I have
designed a module for this too) and this token is then used to create a
hash when each log/record is inserted into the system and inserts that
has as part of the record itself - that prevents tampering with a single
record, while a separate hash is kept for a single column across the
entire table (timestamp and transaction id in my case) - that prevents
tampering entire logs (i.e. adding/deleting entries).
> But we've
> always taken the position that if someone obtains root privileges, tampering with the
> logs is the last thing you need to worry about.
I am sure someone said the same thing before SELinux was invented and
implemented in Fedora. In SELinux even if you are root you are still
restricted by the domain you operate in and by the policies in existence
for that particular domain. My view has always been that you can never
be too careful and this adds another level of security - an additional
barrier for "hackers" to have to break, if you like.
>> Finally, another feature which I am badly missing - the ability to see
>> audit files loaded remotely by the audit-viewer (audit logs located on
>> network shares for example) - this is currently missing and the audit
>> viewer bluntly refuses to load audit file if this file is remotely based
>> and not on the local file system. Is something planned in that respect to
>> enable this?
>>
>
> No idea.
>
It is a restriction in audit-viewer - at least in the version I am using
(stock FC13).
14 years, 1 month
excluding auditd events
by Mr Dash Four
Further to the discussion I've had with Eric Paris, Steve Grubb and various other members over on the SELinux mailing list, I am now glad I am able to seek help and advice as well as prompt further debate on variety of issues concerning the audit daemon.
The main reason for wanting to join the list was that I was having difficulty in trying to exclude certain type of messages (below) for a particular SELinux type being reported to the auditd daemon.
In particular, I wanted to exclude the following from being reported:
msgtype={USER_ACCT|CRED_ACQ|USER_START|CRED_DISP|USER_END}
obj_type=crond_t
success=0
When I try to add this as a rule with "auditctl -A exclude,never -F msgtype=USER_ACCT -F obj_type=crond_t -F success=0" I get "Only msgtype field can be used with exclude filter".
If left unchecked, I am getting "success" messages on a pretty regular intervals (every time cron daemon runs!), thus filling up my audit logs unnecessarily. This won't normally be a big issue on a small system, but when one has to scan thousands of logs every single hour it becomes a bit of a burden. I won't even go into the issue of filling up disk space and consuming system resources unnecessarily.
After having exchanged a few emails with Eric and Steve on that particular issue, it became apparent that since this is a kernel restriction the only feasible solution would be to use "user,exclude" and then the SELinux role I want filtered, though currently no message-type filtering is implemented - either in the kernel, or the audit daemon.
I haven't studied the auditd code at all, but to me, this is far too restrictive and if I am to filter on just SELinux context/role/user etc, I am running the risk, however small, of not seeing a security-related messages, which are of potential interest to me as a developer and sysadmin.
If I am able to filter on (SELinux) user role and message type (even in userspace) that would be good-enough match!
Another couple of things which immediately struck me as soon as I "acquainted" myself with the audit daemon. To me, it is vitally important if any kind of reporting is done on security-related events on a particular system, that reporting to be sufficiently "verifiable" to prevent tampering. Is there such feature implemented in the audit daemon to spot tampering - both on a record level, as well as the audit file as a whole? I couldn't spot such feature during the (admittedly) short time I have studied the audit daemon.
Finally, another feature which I am badly missing - the ability to see audit files loaded remotely by the audit-viewer (audit logs located on network shares for example) - this is currently missing and the audit viewer bluntly refuses to load audit file if this file is remotely based and not on the local file system. Is something planned in that respect to enable this?
14 years, 1 month
[PATCH 4/4] AUDIT: add SELinux support
by Mr Dash Four
Add SELinux context support to the AUDIT target and enable SELinux context reporting on AUDITed packet(s).
Signed-off-by: Mr Dash Four <mr.dash.four(a)googlemail.com>
---
net/netfilter/xt_AUDIT.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/net/netfilter/xt_AUDIT.c b/net/netfilter/xt_AUDIT.c
index f17a0e4..c727215 100644
--- a/net/netfilter/xt_AUDIT.c
+++ b/net/netfilter/xt_AUDIT.c
@@ -20,6 +20,9 @@
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_AUDIT.h>
#include <linux/netfilter_bridge/ebtables.h>
+#ifdef CONFIG_NF_CONNTRACK_SECMARK
+#include <linux/security.h>
+#endif
#ifdef CONFIG_IPV6
#include <net/ipv6.h>
#endif
@@ -130,6 +133,10 @@ audit_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
const struct xt_audit_info *info = par->targinfo;
struct audit_buffer *ab;
+#ifdef CONFIG_NF_CONNTRACK_SECMARK
+ u32 len;
+ char *secctx;
+#endif
ab = audit_log_start(NULL, GFP_ATOMIC, AUDIT_NETFILTER_PKT);
if (ab == NULL)
@@ -143,6 +150,14 @@ audit_tg(struct sk_buff *skb, const struct xt_action_param *par)
if (skb->mark)
audit_log_format(ab, " mark=%#x", skb->mark);
+#ifdef CONFIG_NF_CONNTRACK_SECMARK
+ if (skb->secmark)
+ if (!security_secid_to_secctx(skb->secmark, &secctx, &len)) {
+ audit_log_format(ab, " obj=%s", secctx);
+ security_release_secctx(secctx, len);
+ }
+#endif
+
if (skb->dev && skb->dev->type == ARPHRD_ETHER) {
audit_log_format(ab, " smac=%pM dmac=%pM macproto=0x%04x",
eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest,
--
1.7.3.4
14 years, 1 month
[PATCH 3/4] AUDIT: modify Kconfig to enable build in 2.6.35.13-91 kernel
by Mr Dash Four
Modify Kconfig to enable .config options during oldconfig and menuconfig
Signed-off-by: Mr Dash Four <mr.dash.four(a)googlemail.com>
---
net/netfilter/Kconfig | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 8593a77..e0add10 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -347,6 +347,16 @@ config NETFILTER_XT_CONNMARK
comment "Xtables targets"
+config NETFILTER_XT_TARGET_AUDIT
+ tristate "AUDIT target support"
+ depends on AUDIT
+ depends on NETFILTER_ADVANCED
+ ---help---
+ This option adds a 'AUDIT' target, which can be used to create
+ audit records for packets dropped/accepted.
+
+ To compileit as a module, choose M here. If unsure, say N.
+
config NETFILTER_XT_TARGET_CLASSIFY
tristate '"CLASSIFY" target support'
depends on NETFILTER_ADVANCED
--
1.7.3.4
14 years, 1 month
[PATCH 2/4] AUDIT: modify Makefiles to enable build in 2.6.35.13-91 kernel
by Mr Dash Four
Modify Makefile and Kbuild to enable compilation of the AUDIT target
Signed-off-by: Mr Dash Four <mr.dash.four(a)googlemail.com>
---
include/linux/netfilter/Kbuild | 1 +
net/netfilter/Makefile | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
index 48767cd..6fdc110 100644
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@@ -3,6 +3,7 @@ header-y += nf_conntrack_tuple_common.h
header-y += nfnetlink_conntrack.h
header-y += nfnetlink_log.h
header-y += nfnetlink_queue.h
+header-y += xt_AUDIT.h
header-y += xt_CLASSIFY.h
header-y += xt_CONNMARK.h
header-y += xt_CONNSECMARK.h
diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile
index 14e3a8f..0168485 100644
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_NETFILTER_XT_MARK) += xt_mark.o
obj-$(CONFIG_NETFILTER_XT_CONNMARK) += xt_connmark.o
# targets
+obj-$(CONFIG_NETFILTER_XT_TARGET_AUDIT) += xt_AUDIT.o
obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIFY) += xt_CLASSIFY.o
obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
--
1.7.3.4
14 years, 1 month
[PATCH 1/4] AUDIT: add source files to enable build on 2.6.35.13-91 kernel
by Mr Dash Four
Core source files for the AUDIT target for 2.6.35.13-91 kernel.
Signed-off-by: Mr Dash Four <mr.dash.four(a)googlemail.com>
---
include/linux/audit.h | 2 +
include/linux/netfilter/xt_AUDIT.h | 30 +++++
kernel/audit.c | 2 +
net/netfilter/xt_AUDIT.c | 234 ++++++++++++++++++++++++++++++++++++
4 files changed, 268 insertions(+), 0 deletions(-)
create mode 100644 include/linux/netfilter/xt_AUDIT.h
create mode 100644 net/netfilter/xt_AUDIT.c
diff --git a/include/linux/audit.h b/include/linux/audit.h
index f391d45..1614aa0 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -102,6 +102,8 @@
#define AUDIT_EOE 1320 /* End of multi-record event */
#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */
#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */
+#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */
+#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */
#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */
#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */
diff --git a/include/linux/netfilter/xt_AUDIT.h b/include/linux/netfilter/xt_AUDIT.h
new file mode 100644
index 0000000..5543295
--- /dev/null
+++ b/include/linux/netfilter/xt_AUDIT.h
@@ -0,0 +1,30 @@
+/*
+ * Header file for iptables xt_AUDIT target
+ *
+ * (C) 2010-2011 Thomas Graf <tgraf(a)redhat.com>
+ * (C) 2010-2011 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _XT_AUDIT_TARGET_H
+#define _XT_AUDIT_TARGET_H
+
+#include <linux/types.h>
+
+enum {
+ XT_AUDIT_TYPE_ACCEPT = 0,
+ XT_AUDIT_TYPE_DROP,
+ XT_AUDIT_TYPE_REJECT,
+ __XT_AUDIT_TYPE_MAX,
+};
+
+#define XT_AUDIT_TYPE_MAX (__XT_AUDIT_TYPE_MAX - 1)
+
+struct xt_audit_info {
+ __u8 type; /* XT_AUDIT_TYPE_* */
+};
+
+#endif /* _XT_AUDIT_TARGET_H */
\ No newline at end of file
diff --git a/kernel/audit.c b/kernel/audit.c
index c71bd26..7bc1fc2 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -75,6 +75,8 @@ static int audit_initialized;
int audit_enabled;
int audit_ever_enabled;
+EXPORT_SYMBOL_GPL(audit_enabled);
+
/* Default state when kernel boots without any parameters. */
static int audit_default;
diff --git a/net/netfilter/xt_AUDIT.c b/net/netfilter/xt_AUDIT.c
new file mode 100644
index 0000000..f17a0e4
--- /dev/null
+++ b/net/netfilter/xt_AUDIT.c
@@ -0,0 +1,234 @@
+/*
+ * Creates audit record for dropped/accepted packets
+ *
+ * (C) 2010-2011 Thomas Graf <tgraf(a)redhat.com>
+ * (C) 2010-2011 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/audit.h>
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/if_arp.h>
+#include <linux/netfilter/x_tables.h>
+#include <linux/netfilter/xt_AUDIT.h>
+#include <linux/netfilter_bridge/ebtables.h>
+#ifdef CONFIG_IPV6
+#include <net/ipv6.h>
+#endif
+#include <net/ip.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Graf <tgraf(a)redhat.com>");
+MODULE_DESCRIPTION("Xtables: creates audit records for dropped/accepted packets");
+MODULE_ALIAS("ipt_AUDIT");
+#ifdef CONFIG_IPV6
+MODULE_ALIAS("ip6t_AUDIT");
+#endif
+MODULE_ALIAS("ebt_AUDIT");
+MODULE_ALIAS("arpt_AUDIT");
+
+static void audit_proto(struct audit_buffer *ab, struct sk_buff *skb,
+ unsigned int proto, unsigned int offset)
+{
+ switch (proto) {
+ case IPPROTO_TCP:
+ case IPPROTO_UDP:
+ case IPPROTO_UDPLITE: {
+ const __be16 *pptr;
+ __be16 _ports[2];
+
+ pptr = skb_header_pointer(skb, offset, sizeof(_ports), _ports);
+ if (pptr == NULL) {
+ audit_log_format(ab, " truncated=1");
+ return;
+ }
+
+ audit_log_format(ab, " sport=%hu dport=%hu",
+ ntohs(pptr[0]), ntohs(pptr[1]));
+ }
+ break;
+
+#ifdef CONFIG_IPV6
+ case IPPROTO_ICMPV6:
+#endif
+ case IPPROTO_ICMP: {
+ const u8 *iptr;
+ u8 _ih[2];
+
+ iptr = skb_header_pointer(skb, offset, sizeof(_ih), &_ih);
+ if (iptr == NULL) {
+ audit_log_format(ab, " truncated=1");
+ return;
+ }
+
+ audit_log_format(ab, " icmptype=%hhu icmpcode=%hhu",
+ iptr[0], iptr[1]);
+
+ }
+ break;
+ }
+}
+
+static void audit_ip4(struct audit_buffer *ab, struct sk_buff *skb)
+{
+ struct iphdr _iph;
+ const struct iphdr *ih;
+
+ ih = skb_header_pointer(skb, 0, sizeof(_iph), &_iph);
+ if (!ih) {
+ audit_log_format(ab, " truncated=1");
+ return;
+ }
+
+ audit_log_format(ab, " saddr=%pI4 daddr=%pI4 ipid=%hu proto=%hhu",
+ &ih->saddr, &ih->daddr, ntohs(ih->id), ih->protocol);
+
+ if (ntohs(ih->frag_off) & IP_OFFSET) {
+ audit_log_format(ab, " frag=1");
+ return;
+ }
+
+ audit_proto(ab, skb, ih->protocol, ih->ihl * 4);
+}
+
+#ifdef CONFIG_IPV6
+static void audit_ip6(struct audit_buffer *ab, struct sk_buff *skb)
+{
+ struct ipv6hdr _ip6h;
+ const struct ipv6hdr *ih;
+ u8 nexthdr;
+ int offset;
+
+ ih = skb_header_pointer(skb, skb_network_offset(skb), sizeof(_ip6h), &_ip6h);
+ if (!ih) {
+ audit_log_format(ab, " truncated=1");
+ return;
+ }
+
+ nexthdr = ih->nexthdr;
+ offset = ipv6_skip_exthdr(skb, skb_network_offset(skb) + sizeof(_ip6h),
+ &nexthdr);
+
+ audit_log_format(ab, " saddr=%pI6c daddr=%pI6c proto=%hhu",
+ &ih->saddr, &ih->daddr, nexthdr);
+
+ if (offset)
+ audit_proto(ab, skb, nexthdr, offset);
+}
+#endif
+
+static unsigned int
+audit_tg(struct sk_buff *skb, const struct xt_action_param *par)
+{
+ const struct xt_audit_info *info = par->targinfo;
+ struct audit_buffer *ab;
+
+ ab = audit_log_start(NULL, GFP_ATOMIC, AUDIT_NETFILTER_PKT);
+ if (ab == NULL)
+ goto errout;
+
+ audit_log_format(ab, "action=%hhu hook=%u len=%u inif=%s outif=%s",
+ info->type, par->hooknum, skb->len,
+ par->in ? par->in->name : "?",
+ par->out ? par->out->name : "?");
+
+ if (skb->mark)
+ audit_log_format(ab, " mark=%#x", skb->mark);
+
+ if (skb->dev && skb->dev->type == ARPHRD_ETHER) {
+ audit_log_format(ab, " smac=%pM dmac=%pM macproto=0x%04x",
+ eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest,
+ ntohs(eth_hdr(skb)->h_proto));
+
+ if (par->family == NFPROTO_BRIDGE) {
+ switch (eth_hdr(skb)->h_proto) {
+ case __constant_htons(ETH_P_IP):
+ audit_ip4(ab, skb);
+ break;
+#ifdef CONFIG_IPV6
+
+ case __constant_htons(ETH_P_IPV6):
+ audit_ip6(ab, skb);
+ break;
+#endif
+ }
+ }
+ }
+
+ switch (par->family) {
+ case NFPROTO_IPV4:
+ audit_ip4(ab, skb);
+ break;
+#ifdef CONFIG_IPV6
+
+ case NFPROTO_IPV6:
+ audit_ip6(ab, skb);
+ break;
+#endif
+ }
+
+ audit_log_end(ab);
+
+errout:
+ return XT_CONTINUE;
+}
+
+static unsigned int
+audit_tg_ebt(struct sk_buff *skb, const struct xt_action_param *par)
+{
+ audit_tg(skb, par);
+ return EBT_CONTINUE;
+}
+
+static int audit_tg_check(const struct xt_tgchk_param *par)
+{
+ const struct xt_audit_info *info = par->targinfo;
+
+ if (info->type > XT_AUDIT_TYPE_MAX) {
+ pr_info("Audit type out of range (valid range: 0..%hhu)\n",
+ XT_AUDIT_TYPE_MAX);
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
+static struct xt_target audit_tg_reg[] __read_mostly = {
+ {
+ .name = "AUDIT",
+ .family = NFPROTO_UNSPEC,
+ .target = audit_tg,
+ .targetsize = sizeof(struct xt_audit_info),
+ .checkentry = audit_tg_check,
+ .me = THIS_MODULE,
+ },
+ {
+ .name = "AUDIT",
+ .family = NFPROTO_BRIDGE,
+ .target = audit_tg_ebt,
+ .targetsize = sizeof(struct xt_audit_info),
+ .checkentry = audit_tg_check,
+ .me = THIS_MODULE,
+ },
+};
+
+static int __init audit_tg_init(void)
+{
+ return xt_register_targets(audit_tg_reg, ARRAY_SIZE(audit_tg_reg));
+}
+
+static void __exit audit_tg_exit(void)
+{
+ xt_unregister_targets(audit_tg_reg, ARRAY_SIZE(audit_tg_reg));
+}
+
+module_init(audit_tg_init);
+module_exit(audit_tg_exit);
--
1.7.3.4
14 years, 1 month
