Re: buffer space

On Aug 17, 2009, at 12:58 , Mike Nixon wrote: Attached are is the audit.rules file from SECSCN 4.3. There is a v4.4 now > available but I don't have it handy. Also attached are two docs which > explain SECSCN's auditd configuration expectations. > > -Mike > > Yeah, the audit.rules that you have there is the test version that I hacked together more than two years ago as a "first cut". It includes a lot of stuff which might or might have not been installed or needed, just on the off chance. The intent there was to discuss the rules requirements with your certifier, not to take them as gospel. That stuff should have been reviewed some time ago. I will be glad to refer specific concerns or recommended fixes to the current development team. Lenny, you should have dropped me a line about this thread. I only casually monitor this list, and happened upon it by chance. Dave Muran-de Assereto On Mon, Aug 17, 2009 at 11:34 AM, Norman Mark St. Laurent < > mstlaurent(a)conceras.com&gt; wrote: > > Hi David, >> >> I too would like to know what version of SECSCAN you are using for the >> "required watches". I run the STIGS, SECSCAN, and a myriad of >> vulnerability >> analysis tools (outside looking in --> inside looking around) on systems >> that I ISSE and provision. I do not recall "required watches" that need >> to >> be set with this tool, but I maybe off a version and I may need to visit >> another sight to pick up the latest and greatest.... >> >> I know SECSCAN would like the System to be configured to HALT on audit >> failure using the disk_ful_action_setting in /etc/audit/auditd.conf. It >> would also like the system to be configured to halt on audit disk error >> as >> well as the audit data to be synchronously flushed to disk to avoid data >> loss. To do this (respectfully) I have set in my KickStarts and >> Satellite: >> >> perl -npe 's/disk_full_action = SUSPEND/disk_full_action = HALT/' -i >> /etc/audit/auditd.conf >> perl -npe 's/disk_error_action = SUSPEND/disk_error_action = HALT/' -i >> /etc/audit/auditd.conf >> perl -npe 's/flush = INCREMENTAL/flush = SYNC/' -i /etc/audit/auditd.conf >> >> Currently I set the /var/log/audit logs to rotate daily for 90 days... >> in >> /etc/logrotate.d/audit and the capp.rules ; nispom.rules in >> /usr/share/doc/audit* all work great and provide nice examples to comply >> with Security Policy. >> >> Because of the logrotation and the way aureport works, I have written a >> wrapper script to be able to search and report all the log files. >> Something >> of this type would help the Security Officers look threw the log files. >> The >> script also keeps a pristine copy of the log files for investigation with >> digital sigs to watch the tampering (as well as aide) for investigation >> if >> need be --> this keeps processing the files (MAC Times) and a pristine >> copy >> separated. >> >> I am very interested in finding our more about these set watches that are >> required in SECSCAN. >> >> Best regards, >> >> >> Norman Mark St. Laurent >> Conceras | Chief Technology Officer and ISSE >> >> >> >> David Flatley wrote: >> >> >>> Thanks Steve! >>> If I were to move all the rotated logs to another directory, say >>> /home/logs. So instead of doing "ausearch -i" to capture all the >>> information >>> in the rotated logs in >>> /var/log/audit directory. I would do "ausearch -i -f /home/logs" , >>> correct? >>> >>> Backlog is set to 12288 right now. >>> >>> The SECSCAN requires many -w (watches) and a fair amount of syscalls. I >>> modified the syscalls to add your recommendation for using "arch=b32" >>> and >>> "arch=b64". >>> Because I was getting errors restarting the auditd on some of their >>> recommendations one of which was mount? >>> >>> Another setting I believe was doing me in was the log size is 20 megs >>> and >>> I allow 8 rotated logs. But I had admin_disk_full set to 160 and the >>> action >>> was suspend. >>> So this could have been tripping me up also. >>> >>> I would like to be able to do the audit log extractions (ausearch and >>> aureport) when I get say 8 - 20 megs logs. I see I can do an exec on a >>> script in max_log_file_action. >>> So if I set the max_log_file to 160, I can then run a script to move the >>> rotated logs and process them, thus not stopping auditd and keeping >>> things >>> working? I would set the >>> max rotated logs to 10 to allow the new rotated log space then move the >>> logs as you suggest. >>> >>> Thanks. >>> >>> David Flatley CISSP >>> >>> >>> >>> >>> Inactive hide details for Steve Grubb ---08/13/2009 02:29:34 PM---On >>> Thursday 13 August 2009 10:56:50 am David Flatley wrote: > Steve Grubb >>> ---08/13/2009 02:29:34 PM---On Thursday 13 August 2009 10:56:50 am David >>> Flatley wrote: > Red Hat 5.3 running audit 1.7.7-6 >>> >>> >>> From: >>> Steve Grubb <sgrubb(a)redhat.com&gt; >>> >>> To: >>> linux-audit(a)redhat.com >>> >>> Cc: >>> David Flatley/Burlington/IBM@IBMUS >>> >>> Date: >>> 08/13/2009 02:29 PM >>> >>> Subject: >>> Re: buffer space >>> >>> >>> >>> >>> On Thursday 13 August 2009 10:56:50 am David Flatley wrote: >>> >>>> Red Hat 5.3 running audit 1.7.7-6 >>>> Rotating logs at 20 megs and allowing 8 logs >>>> Rules have watches and syscalls from the SECSCAN recommendations, and >>>> >>> have >>> >>>> added some of Steve Grubb's recommendations. >>>> >>> >>> I would be curious what the SECSCAN recommendations are. Never heard of >>> it... >>> >>> >>> When we extract and archive the audit logs we get "Error receiving >>>> audit >>>> netlink packet (No buffer space available) an "error sending signal >>>> info >>>> request" >>>> Our extract is: stop auditd then create a file and run ausearch -i > >>>> >>> file >>> >>>> then run an aureport -i > file then once that is done we delete all the >>>> logs and restart auditd. >>>> >>> >>> I think this is your problem. If you have audit rules loaded and stop >>> auditd, >>> then audit events are going to pile up in the queue waiting for auditd >>> to >>> download them. At some point the kernel will decide auditd doesn't exist >>> and >>> will dump all events to syslog. This probably is not what you want >>> either. >>> >>> I would recommend calling "service auditd rotate" and then grab logs >>> audit.log.1 -> audit.logs.7 and move them away to another directory for >>> post processing the contents. >>> >>> You may also want to check you backlog size settings too. >>> >>> >>> If I run this manually it works fine but if I have it running it in a >>>> >>> cron >>> >>>> we get Kernel panics, lockups and log data loss plus the buffer >>>> >>> messages. >>> >>> Shouldn't really make a difference. >>> >>> -Steve >>> >>> >>> ------------------------------------------------------------------------ >>> >>> -- >>> Linux-audit mailing list >>> Linux-audit(a)redhat.com >>> https://www.redhat.com/mailman/listinfo/linux-audit >>> >>> >> -- >> Linux-audit mailing list >> Linux-audit(a)redhat.com >> https://www.redhat.com/mailman/listinfo/linux-audit >> >> <AUDIT1.HTML><AUDIT.RULES><AUDITDESCRIP.HTML>-- > Linux-audit mailing list > Linux-audit(a)redhat.com > https://www.redhat.com/mailman/listinfo/linux-audit > David Muran-de Assereto dmuran(a)tuad.org XML is like violence: if it doesn't solve your problem, you're not using enough of it.