Re: Audisp-remote - connection refused.

On Monday, October 2, 2017 11:31:15 PM EDT Rituraj Buddhisagar wrote: > P > ​lease see inline- > > regards > ​ > > On Tue, Oct 3, 2017 at 3:28 AM, Steve Grubb <sgrubb(a)redhat.com&gt; wrote: > > On Monday, October 2, 2017 2:55:51 PM EDT Rituraj Buddhisagar wrote: > > > Hi > > > > > > I tried my best to configure the audisp-remote. > > > I am getting below error on the client machine in /var/log/syslog. > > > > > > Oct 2 14:41:15 xxxxxx audisp-remote: Error connecting to 192.168.103.7: > > > Connection refused > > > > On the server, what do you get for: > > > > ausearch --start recent -m DAEMON_ACCEPT -i > > > > The server side records some information about why it did not allow a > > connection. > > ​I dont see any info in here. > > # ausearch --start recent -m DAEMON_ACCEPT -i > <no matches> Then its not connecting at all. Maybe your firewall is blocking it. Maybe selinux is blocking it? Once auditd sees its socket is readable, it calls accept(2) and there is no path through the code that doesn't log an event with a reason. Every possible failure logs a distinct reason why the connection failed. > I tried without --start & -i options as well. --start today if you didn't connect within 10 minutes of running the command. > But when I do a tcpdump on central server, I do see requests coming in. (I > changed port to 60). > # tcpdump -i eth1 '( port 60 )' > 08:53:56.597946 IP gusm1.60 > 192.168.103.7.60: Flags [S], seq 4076269451, > win 29200, options [mss 1460,sackOK,TS val 207316 ecr 0,nop,wscale 7], > length 0 > 08:53:56.597980 IP 192.168.103.7.60 > gusm1.60: Flags [R.], seq 0, ack > 4076269452, win 0, length 0 > 08:53:56.598843 IP gusm1.60 > 192.168.103.7.60: Flags [S], seq 4076287474, > win 29200, options [mss 1460,sackOK,TS val 207316 ecr 0,nop,wscale 7], > length 0 > 08:53:56.598858 IP 192.168.103.7.60 > gusm1.60: Flags [R.], seq 0, ack > 18024, win 0, length 0 > 08:53:56.599164 IP gusm1.60 > 192.168.103.7.60: Flags [S], seq 4076300652, > win 29200, options [mss 1460,sackOK,TS val 207316 ecr 0,nop,wscale 7], > length 0 > 08:53:56.599175 IP 192.168.103.7.60 > gusm1.60: Flags [R.], seq 0, ack > 31202, win 0, length 0 > 08:53:56.599657 IP gusm1.60 > 192.168.103.7.60: Flags [S], seq 4076306151, > win 29200, options [mss 1460,sackOK,TS val 207316 ecr 0,nop,wscale 7], > length 0 > > I think the service is only listening locally and not for remote > connections? It opens a socket on all addresses. # netstat -tanp | grep auditd tcp 0 0 0.0.0.0:60 0.0.0.0:* LISTEN 893/auditd > root@logs:/etc/audit# lsof -i :60 > COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME > audisp-re 1713 root 3u IPv4 17433 0t0 TCP 192.168.103.7:60-> > 192.168.103.7:60 (ESTABLISHED) > > > How do I see that I am using libwrap? It should have a config line in auditd.conf. If you do not, it defaults to yes. That means it looks in /etc/hosts.allow and hosts.deny to decide. Odds are you put nothing there and the connection proceeds. If I were to guess, I'd say iptables is blocking your connection. > I have enable_krb5=no in the > auditd.conf on the aggregative server. Good. Cause doing a krb5 connection without setting that up will cause it to fail also. I'd bet on iptables being the problem. -Steve > > > 192.168.103.7 is the IP address of the central log server. > > > > > > Notes: My settings are below: > > > > > > on server as well on client: > > > /etc/audisp/audisp-remote > > > > > > remote_server = 192.168.103.7 > > > port = 6999 > > > local_port = 6999 > > > transport = tcp > > > queue_file = /var/spool/audit/remote.log > > > mode = immediate > > > queue_depth = 2048 > > > format = ascii > > > network_retry_time = 100 > > > > This is probably not your problem but managed is the normal setting for > > format. And do you have enable_krb5 set to no? > > > > > I have enabled name_format=HOSTNAME only in one place (in > > > /etc/audisp/audispd.conf - and not in /etc/audit/auditd.conf > > > > > > entries in auditd.conf: > > > > > > rtcp_listen_port = 6999 > > > tcp_listen_queue = 5 > > > tcp_max_per_addr = 10 > > > tcp_client_ports = 0-65535 > > > tcp_client_max_idle = 0 > > > > What do you have for use_libwrap and enable_krb5? > > > > The ausearcn info from the aggregating server should tell the reason why > > the > > connection is rejected. > > > > -Steve > > > > > I see the server is listening on the port 6999 as below but its not > > > accepting client request. > > > root@logs:/etc# lsof -i :6999 > > > COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME > > > audisp-re 9091 root 3u IPv4 33671 0t0 TCP 192.168.103.7:6999 > > > > -> > > > > > 192.168.103.7:6999 (ESTABLISHED) > > > > > > > > > > > > Best Regards, > > > Rituraj B