Re: Re. 2.6.15-mm1

--- David Woodhouse wrote: Ok, did "rpm -e audit" (when I put back SELINUX=permissive I had to wait for a re-index of the EXT3 filesystem and since lost the sound mixer but doesn't matter). $ grep SLAB linux-2.6.15-mm2/.config CONFIG_SLAB=y CONFIG_DEBUG_SLAB=y $ grep SLOB linux-2.6.15-mm2/.config # CONFIG_SLOB is not set $ make /boot/linux-2.6.15-mm2-slab.kgz modules modules_install --> try booting, failed not arriving to a mounted filesystem. $ cd gujin && make proper dep /dev/fd0.com2 --> Put the floppy in the failling PC, get another PC on the other side of the twisted serial cable and a terminal at 9600 bauds, log file named "serial_mm2.txt" attached. Running right now on 2.6.15 so attach dmesg-2.6.15 too. Does it give you more information? I am sorry I no more have a proper LILO or Grub around... Etienne. ___________________________________________________________________________ Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international. Téléchargez sur http://fr.messenger.yahoo.com echo "hello" > /dev/ttyS1 hello stty < /dev/ttyS1 > /dev/ttyS1 speed 9600 baud; line = 0; -brkint -imaxbel Rebooting now Gujin1, gujin2......................... go! v1.3 (C) Etienne LORRAIN 2005. <String to initialise modem> AMD Athlon(tm) XP 1600+ processor family 6 at 1,399 MHz on BIOS base memory: 639 Kb, extended memory: 523264 Kb [E820] serial keyboard, 2 serial ports, BIOS (PS2) mouse. Serial terminal, VT100, modes: 0..1. Detecting disks: Have found 5 disks: 0: IDE/lba48 master@0x1F0,0x3F6 (*HCPB), size 157066 Mb, 8 partitions. 1: ATAPI/lba master@0x170,0x376, size 60 Mb, 1 partitions. 2: ATAPI/lba slave@0x170,0x376, no media detected. 3: EBIOS 0x80 (*), size 157066 Mb, 8 partitions. 4: BIOS 0x00 C/H/S: 80/2/18, size 1440 Kb, 0 partitions. Analyse filesystems Warning: IDE/lba48 master@0x1F0,0x3F6 partition 8 wastes 45667010 sectors! Warning: ATAPI/lba master@0x170,0x376 partition 1, filesystem bigger than partit Warning: EBIOS 0x80 partition 8 wastes 45667010 sectors! : found 44 ways to boot and 16 initial RAM disks. Press "Pause" if you want to temporary stop display... mode 0x0: text , 8x16 font, 2 modes. -------------------------------------------------------------------------------- Resolution: (-) 80x24 <+> Colors: (/) 0 bpp (*) go to graphic (.) Alternate (Tab) Setup < > -------------------------------------------------------------------------------- <PageUp> <Home> PF1: : 'root_fedora4': /boot/linux-2.6.15-16M.kgz, initrd-2.6.15-mm1.img PF2: : 'root_fedora4': /boot/linux-2.6.15-mm2.kgz, initrd-2.6.15-mm2.img PF3: : 'root_fedora4': /boot/linux-2.6.15-mm2-slab.kgz, initrd-2.6.15-mm2.img PF4: : 'WIN ': MSWIN4.1 <PageDown> <end> -------------------------------------------------------------------------------- Loading kernel "/boot/linux-2.6.15-mm2-slab.kgz", loading initial RAMdisk " /boot/initrd-2.6.15-mm2.img", Starting kernel. Linux version 2.6.15-mm2slab (etienne(a)localhost.localdomain) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #3 Tue Jan 10 21:48:22 GMT 2006 BIOS-provided physical RAM map:------------------------------------------------- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)5 Etienne LORRAIN V 1.3 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000020000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 512MB LOWMEM available. DMI 2.3 present. ACPI: Unable to locate RSDP Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Detected 1400.170 MHz processor. Built 1 zonelists Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Kernel command line: /boot/linux-2.6.15-mm2-slab.kgz console=ttyS1,9600n8 mouse= /dev/psaux COLS=80 LINES=24 LANG=en rhgb ro root=/dev/hda3 ide0=0x1f0,0x3f6,14 ide1=0x170,0x376 ide_setup: ide0=0x1f0,0x3f6,14 -- OBSOLETE OPTION, WILL BE REMOVED SOON! ide_setup: ide1=0x170,0x376 -- OBSOLETE OPTION, WILL BE REMOVED SOON! CPU 0 irqstacks, hard=c03f0000 soft=c03f1000 PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 513344k/524288k available (2193k kernel code, 10516k reserved, 618k data , 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2802.92 BogoMIPS (lpj=5605844) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) XP 1600+ stepping 02 Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 2244k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20051216 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI quirk: region 0800-087f claimed by vt8235 PM PCI quirk: region 0400-040f claimed by vt8235 SMB PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0 PCI: Found IRQ 5 for device 0000:00:06.0 PCI: Sharing IRQ 5 with 0000:00:10.1 PCI: Hardcoded IRQ 14 for device 0000:00:11.1 PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: dfe00000-dfefffff PREFETCH window: cfd00000-dfcfffff PCI: Bus 2, cardbus bridge: 0000:00:06.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Enabling device 0000:00:06.0 (0000 -> 0003) PCI: Found IRQ 5 for device 0000:00:06.0 PCI: Sharing IRQ 5 with 0000:00:10.1 Time: tsc clocksource has been installed. audit: initializing netlink socket (disabled) audit(1136932268.392:1): initialized Total HugeTLB memory allocated, 0 SELinux: Registering netfilter hooks Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: AGP aperture is 128M @ 0xe0000000 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 sec onds). Hangcheck: Using monotonic_clock(). PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ÿserial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 PCI: Hardcoded IRQ 14 for device 0000:00:11.1 PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 14 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA hda: HDS722516VLAT20, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive hdd: ASUS DVD-ROM E616, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: Host Protected Area detected. current capacity is 321607416 sectors (164662 MB) native capacity is 321672960 sectors (164696 MB) hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } ide: failed opcode was: 0x37 hda: 321607416 sectors (164662 MB) w/1794KiB Cache, CHS=20019/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 48X DVD-ROM drive, 512kB Cache ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Jan 10 2006 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 172k freed Red Hat nash version 4.2.15 starting Mounted /proc filesystem Mounting sysfs Creating /dev Sjbd: no version for "struct_module" found: kernel tainted. tarting udev Lojbd: Unknown symbol kmalloc ading jbd.ko modext3: Unknown symbol journal_force_commit ule insmod: errext3: Unknown symbol journal_dirty_data or inserting '/lext3: Unknown symbol journal_force_commit_nested ib/jbd.ko': -1 Uext3: Unknown symbol journal_init_dev nknown symbol inext3: Unknown symbol journal_dirty_metadata module ERROR: ext3: Unknown symbol journal_forget /bin/insmod exitext3: Unknown symbol journal_wipe ed abnormally wiext3: Unknown symbol journal_blocks_per_page th value 1 ! (piext3: Unknown symbol journal_errno d 245) Loading ext3: Unknown symbol journal_extend ext3.ko module ext3: Unknown symbol journal_invalidatepage ext3: Unknown symbol journal_create ext3: Unknown symbol journal_unlock_updates ext3: Unknown symbol journal_revoke ext3: Unknown symbol journal_lock_updates ext3: Unknown symbol journal_start_commit ext3: Unknown symbol journal_flush ext3: Unknown symbol journal_load ext3: Unknown symbol journal_try_to_free_buffers ext3: Unknown symbol journal_update_format ext3: Unknown symbol journal_get_write_access ext3: Unknown symbol journal_get_undo_access ext3: Unknown symbol journal_get_create_access ext3: Unknown symbol journal_destroy ext3: Unknown symbol journal_clear_err ext3: Unknown symbol journal_stop ext3: Unknown symbol journal_init_inode ext3: Unknown symbol journal_start ext3: Unknown symbol log_wait_commit ext3: Unknown symbol kmalloc ext3: Unknown symbol journal_release_buffer ext3: Unknown symbol journal_check_available_features ext3: Unknown symbol journal_abort ext3: Unknown symbol journal_restart insmod: error inserting '/lib/ext3.ko': -1 Unknown symbol in module ERROR: /binKernel panic - not syncing: Attempted to kill init! /insmod exited a bnormally with value 1 ! (pid 246) Creating root device Mounting root filesystem mount: error 19 mounting ext3 Switching to new root ERROR opening /dev/console!!!!: 2 error dup2'ing fd of 0 to 0 error dup2'ing fd of 0 to 1 error dup2'ing fd of 0 to 2 unmounting old /proc unmounting old /sys switchroot: mount failed: 22