3:55 p.m.
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
Signed-off-by: Tyler Hicks <tyhicks(a)canonical.com>
---
* Changes since v4:
- This is a new patch that allows the application to have a say in what gets
logged
include/linux/seccomp.h | 3 +-
include/uapi/linux/seccomp.h | 1 +
kernel/seccomp.c | 78 ++++++++++++++++-----------
tools/testing/selftests/seccomp/seccomp_bpf.c | 66 +++++++++++++++++++++++
4 files changed, 116 insertions(+), 32 deletions(-)
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index ecc296c..c8bef43 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -3,7 +3,8 @@
#include <uapi/linux/seccomp.h>
-#define SECCOMP_FILTER_FLAG_MASK (SECCOMP_FILTER_FLAG_TSYNC)
+#define SECCOMP_FILTER_FLAG_MASK (SECCOMP_FILTER_FLAG_TSYNC | \
+ SECCOMP_FILTER_FLAG_LOG)
#ifdef CONFIG_SECCOMP
diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
index 0f238a4..82c823c 100644
--- a/include/uapi/linux/seccomp.h
+++ b/include/uapi/linux/seccomp.h
@@ -16,6 +16,7 @@
/* Valid flags for SECCOMP_SET_MODE_FILTER */
#define SECCOMP_FILTER_FLAG_TSYNC 1
+#define SECCOMP_FILTER_FLAG_LOG 2
/*
* All BPF programs must return a 32-bit value.
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index 87257f2..1c4c496 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -44,6 +44,7 @@
* get/put helpers should be used when accessing an instance
* outside of a lifetime-guarded section. In general, this
* is only needed for handling filters shared across tasks.
+ * @log: true if all actions except for SECCOMP_RET_ALLOW should be logged
* @prev: points to a previously installed, or inherited, filter
* @prog: the BPF program to evaluate
*
@@ -59,6 +60,7 @@
*/
struct seccomp_filter {
refcount_t usage;
+ bool log;
struct seccomp_filter *prev;
struct bpf_prog *prog;
};
@@ -172,11 +174,14 @@ static int seccomp_check_filter(struct sock_filter *filter, unsigned
int flen)
/**
* seccomp_run_filters - evaluates all seccomp filters against @sd
+ * @filter: upon return, points to the matched filter but may be NULL in some
+ * unexpected situations
* @sd: optional seccomp data to be passed to filters
*
* Returns valid seccomp BPF response codes.
*/
-static u32 seccomp_run_filters(const struct seccomp_data *sd)
+static u32 seccomp_run_filters(struct seccomp_filter **filter,
+ const struct seccomp_data *sd)
{
struct seccomp_data sd_local;
u32 ret = SECCOMP_RET_ALLOW;
@@ -184,6 +189,8 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd)
struct seccomp_filter *f =
lockless_dereference(current->seccomp.filter);
+ *filter = f;
+
/* Ensure unexpected behavior doesn't result in failing open. */
if (unlikely(WARN_ON(f == NULL)))
return SECCOMP_RET_KILL;
@@ -200,8 +207,10 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd)
for (; f; f = f->prev) {
u32 cur_ret = BPF_PROG_RUN(f->prog, sd);
- if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION))
+ if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION)) {
ret = cur_ret;
+ *filter = f;
+ }
}
return ret;
}
@@ -446,6 +455,9 @@ static long seccomp_attach_filter(unsigned int flags,
return ret;
}
+ if (flags & SECCOMP_FILTER_FLAG_LOG)
+ filter->log = true;
+
/*
* If there is an existing filter, make it the prev and don't drop its
* task reference.
@@ -526,36 +538,39 @@ static void seccomp_send_sigsys(int syscall, int reason)
static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP |
SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE;
-static inline void seccomp_log(unsigned long syscall, long signr, u32 action)
+static inline void seccomp_log(unsigned long syscall, long signr, u32 action,
+ bool requested)
{
- bool log;
+ if (requested) {
+ bool log;
+
+ switch (action) {
+ case SECCOMP_RET_TRAP:
+ log = seccomp_actions_logged & SECCOMP_LOG_TRAP;
+ break;
+ case SECCOMP_RET_ERRNO:
+ log = seccomp_actions_logged & SECCOMP_LOG_ERRNO;
+ break;
+ case SECCOMP_RET_TRACE:
+ log = seccomp_actions_logged & SECCOMP_LOG_TRACE;
+ break;
+ case SECCOMP_RET_ALLOW:
+ log = false;
+ break;
+ case SECCOMP_RET_KILL:
+ default:
+ log = seccomp_actions_logged & SECCOMP_LOG_KILL;
+ }
- switch (action) {
- case SECCOMP_RET_TRAP:
- log = seccomp_actions_logged & SECCOMP_LOG_TRAP;
- break;
- case SECCOMP_RET_ERRNO:
- log = seccomp_actions_logged & SECCOMP_LOG_ERRNO;
- break;
- case SECCOMP_RET_TRACE:
- log = seccomp_actions_logged & SECCOMP_LOG_TRACE;
- break;
- case SECCOMP_RET_ALLOW:
- log = false;
- break;
- case SECCOMP_RET_KILL:
- default:
- log = seccomp_actions_logged & SECCOMP_LOG_KILL;
+ /*
+ * Force an audit message to be emitted when the action is
+ * allowed to be logged by the admin.
+ */
+ if (log)
+ return __audit_seccomp(syscall, signr, action);
}
/*
- * Force an audit message to be emitted when the action is allowed to
- * be logged by the admin.
- */
- if (log)
- return __audit_seccomp(syscall, signr, action);
-
- /*
* Let the audit subsystem decide if the action should be audited based
* on whether the current task itself is being audited.
*/
@@ -587,7 +602,7 @@ static void __secure_computing_strict(int this_syscall)
#ifdef SECCOMP_DEBUG
dump_stack();
#endif
- seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL);
+ seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL, true);
do_exit(SIGKILL);
}
@@ -613,6 +628,7 @@ void secure_computing_strict(int this_syscall)
static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
const bool recheck_after_trace)
{
+ struct seccomp_filter *filter;
u32 filter_ret, action;
int data;
@@ -622,7 +638,7 @@ static int __seccomp_filter(int this_syscall, const struct
seccomp_data *sd,
*/
rmb();
- filter_ret = seccomp_run_filters(sd);
+ filter_ret = seccomp_run_filters(&filter, sd);
data = filter_ret & SECCOMP_RET_DATA;
action = filter_ret & SECCOMP_RET_ACTION;
@@ -690,7 +706,7 @@ static int __seccomp_filter(int this_syscall, const struct
seccomp_data *sd,
case SECCOMP_RET_KILL:
default:
- seccomp_log(this_syscall, SIGSYS, action);
+ seccomp_log(this_syscall, SIGSYS, action, true);
/* Dump core only if this is the last remaining thread. */
if (get_nr_threads(current) == 1) {
siginfo_t info;
@@ -707,7 +723,7 @@ static int __seccomp_filter(int this_syscall, const struct
seccomp_data *sd,
unreachable();
skip:
- seccomp_log(this_syscall, 0, action);
+ seccomp_log(this_syscall, 0, action, filter ? filter->log : false);
return -1;
}
#else
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c
b/tools/testing/selftests/seccomp/seccomp_bpf.c
index 73f5ea6..eeb4f7a 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -1687,6 +1687,10 @@ TEST_F_SIGNAL(TRACE_syscall, kill_after_ptrace, SIGSYS)
#define SECCOMP_FILTER_FLAG_TSYNC 1
#endif
+#ifndef SECCOMP_FILTER_FLAG_LOG
+#define SECCOMP_FILTER_FLAG_LOG 2
+#endif
+
#ifndef seccomp
int seccomp(unsigned int op, unsigned int flags, void *args)
{
@@ -2421,6 +2425,67 @@ TEST(syscall_restart)
_metadata->passed = 0;
}
+TEST_SIGNAL(filter_flag_log, SIGSYS)
+{
+ struct sock_filter allow_filter[] = {
+ BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW),
+ };
+ struct sock_filter kill_filter[] = {
+ BPF_STMT(BPF_LD|BPF_W|BPF_ABS,
+ offsetof(struct seccomp_data, nr)),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_getpid, 0, 1),
+ BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_KILL),
+ BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW),
+ };
+ struct sock_fprog allow_prog = {
+ .len = (unsigned short)ARRAY_SIZE(allow_filter),
+ .filter = allow_filter,
+ };
+ struct sock_fprog kill_prog = {
+ .len = (unsigned short)ARRAY_SIZE(kill_filter),
+ .filter = kill_filter,
+ };
+ long ret;
+ pid_t parent = getppid();
+
+ ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0);
+ ASSERT_EQ(0, ret);
+
+ /* Verify that the FILTER_FLAG_LOG flag isn't accepted in strict mode */
+ ret = seccomp(SECCOMP_SET_MODE_STRICT, SECCOMP_FILTER_FLAG_LOG,
+ &allow_prog);
+ ASSERT_NE(ENOSYS, errno) {
+ TH_LOG("Kernel does not support seccomp syscall!");
+ }
+ EXPECT_NE(0, ret) {
+ TH_LOG("Kernel accepted FILTER_FLAG_LOG flag in strict mode!");
+ }
+ EXPECT_EQ(EINVAL, errno) {
+ TH_LOG("Kernel returned unexpected errno for FILTER_FLAG_LOG flag in strict
mode!");
+ }
+
+ /* Verify that a simple, permissive filter can be added with no flags */
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, 0, &allow_prog);
+ EXPECT_EQ(0, ret);
+
+ /* See if the same filter can be added with the FILTER_FLAG_LOG flag */
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_LOG,
+ &allow_prog);
+ ASSERT_NE(EINVAL, errno) {
+ TH_LOG("Kernel does not support the FILTER_FLAG_LOG flag!");
+ }
+ EXPECT_EQ(0, ret);
+
+ /* Ensure that the kill filter works with the FILTER_FLAG_LOG flag */
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_LOG,
+ &kill_prog);
+ EXPECT_EQ(0, ret);
+
+ EXPECT_EQ(parent, syscall(__NR_getppid));
+ /* getpid() should never return. */
+ EXPECT_EQ(0, syscall(__NR_getpid));
+}
+
/*
* TODO:
* - add microbenchmarks
@@ -2429,6 +2494,7 @@ TEST(syscall_restart)
* - endianness checking when appropriate
* - 64-bit arg prodding
* - arch value testing (x86 modes especially)
+ * - verify that FILTER_FLAG_LOG filters generate log messages
* - ...
*/
--
2.7.4