4:47 a.m.
Hi all,
I have fedora-server-24 installed on my raspberry-pi-3, following the guide
https://fedoraproject.org/wiki/Raspberry_Pi.
Once I get my raspberry pi boot up, there were error mentioning that "audit
support not in kernel", which I believed were then resolved after I rebuild
my kernel.
However, I got stuck when I tried to add rule using `auditctl` command as
below:
`# auditctl -w /etc/passwd -p wa -k passwd_changes`
Error sending add rule data request (Invalid argument)
I tried to search for solution but it lead me to a bug that were already
been solved like years ago. Can anyone tell me if I am in the right way of
getting auditd works on raspberry pi? Were the problem I've faced were
already a known issue?
Below are my system information and some logs/details when I tried to
diagnosis the problem and thanks a lot for your help in advance!
`# uname -a`
Linux raspi3.lab 4.4.23-v7+ #2 SMP Sat Oct 1 15:24:41 CST 2016 armv7l
armv7l armv7l GNU/Linux
`# modprobe configs ; gunzip -dc /proc/config.gz | grep AUDIT`
CONFIG_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
`# systemctl status auditd.service`
● auditd.service - Security Auditing Service
Loaded: loaded (/usr/lib/systemd/system/auditd.service; enabled; vendor
preset: enabled)
Active: active (running) since Fri 2016-02-12 00:28:07 CST; 7 months 19
days ago
Process: 1553 ExecReload=/bin/kill -HUP $MAINPID (code=exited,
status=0/SUCCESS)
Process: 279 ExecStartPost=/sbin/augenrules --load (code=exited,
status=1/FAILURE)
Main PID: 278 (auditd)
CGroup: /system.slice/auditd.service
└─278 /sbin/auditd -n
Oct 01 16:36:53 raspi3.lab auditd[278]: audit(1475311013.356:8458)
op=reconfigure state=changed auid=4294967295 pid=-1 subj=? res=success
Oct 01 16:36:53 raspi3.lab systemd[1]: Reloaded Security Auditing Service.
Oct 01 16:37:28 raspi3.lab systemd[1]: Reloading Security Auditing Service.
Oct 01 16:37:28 raspi3.lab auditd[278]: config change requested by pid=-1
auid=4294967295 subj=?
Oct 01 16:37:28 raspi3.lab auditd[278]: audit(1475311048.046:257)
op=reconfigure state=changed auid=4294967295 pid=-1 subj=? res=success
Oct 01 16:37:28 raspi3.lab systemd[1]: Reloaded Security Auditing Service.
Oct 01 16:38:18 raspi3.lab systemd[1]: Reloading Security Auditing Service.
Oct 01 16:38:18 raspi3.lab auditd[278]: config change requested by pid=-1
auid=4294967295 subj=?
Oct 01 16:38:18 raspi3.lab auditd[278]: audit(1475311098.716:2108)
op=reconfigure state=changed auid=4294967295 pid=-1 subj=? res=success
Oct 01 16:38:18 raspi3.lab systemd[1]: Reloaded Security Auditing Service.
While my `/var/log/audit/audit.log` was full with lines of "SERVICE_START"
& "SERVICE_STOP"
type=SERVICE_START msg=audit(1475313700.696:276): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=?
res=success'
type=SERVICE_STOP msg=audit(1475313710.836:277): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=?
res=success'
Sincerly,
CHING YI.
11:20 a.m.
On Saturday, October 1, 2016 5:47:47 PM EDT C.y wrote:
Hi all,
I have fedora-server-24 installed on my raspberry-pi-3, following the guide
https://fedoraproject.org/wiki/Raspberry_Pi.
Once I get my raspberry pi boot up, there were error mentioning that "audit
support not in kernel", which I believed were then resolved after I rebuild
my kernel.
However, I got stuck when I tried to add rule using `auditctl` command as
below:
`# auditctl -w /etc/passwd -p wa -k passwd_changes`
Error sending add rule data request (Invalid argument)
Hmm. I wonder if 'ausyscall open' gives you syscalls.
I tried to search for solution but it lead me to a bug that were
already
been solved like years ago. Can anyone tell me if I am in the right way of
getting auditd works on raspberry pi? Were the problem I've faced were
already a known issue?
Below are my system information and some logs/details when I tried to
diagnosis the problem and thanks a lot for your help in advance!
`# uname -a`
Linux raspi3.lab 4.4.23-v7+ #2 SMP Sat Oct 1 15:24:41 CST 2016 armv7l
armv7l armv7l GNU/Linux
I also wonder if we have a mismatch here. Is that armv seventy one or armv
seven-el? Its coded in audit as seventy one.
-Steve
`# modprobe configs ; gunzip -dc /proc/config.gz | grep AUDIT`
CONFIG_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
`# systemctl status auditd.service`
● auditd.service - Security Auditing Service
Loaded: loaded (/usr/lib/systemd/system/auditd.service; enabled; vendor
preset: enabled)
Active: active (running) since Fri 2016-02-12 00:28:07 CST; 7 months 19
days ago
Process: 1553 ExecReload=/bin/kill -HUP $MAINPID (code=exited,
status=0/SUCCESS)
Process: 279 ExecStartPost=/sbin/augenrules --load (code=exited,
status=1/FAILURE)
Main PID: 278 (auditd)
CGroup: /system.slice/auditd.service
└─278 /sbin/auditd -n
Oct 01 16:36:53 raspi3.lab auditd[278]: audit(1475311013.356:8458)
op=reconfigure state=changed auid=4294967295 pid=-1 subj=? res=success
Oct 01 16:36:53 raspi3.lab systemd[1]: Reloaded Security Auditing Service.
Oct 01 16:37:28 raspi3.lab systemd[1]: Reloading Security Auditing Service.
Oct 01 16:37:28 raspi3.lab auditd[278]: config change requested by pid=-1
auid=4294967295 subj=?
Oct 01 16:37:28 raspi3.lab auditd[278]: audit(1475311048.046:257)
op=reconfigure state=changed auid=4294967295 pid=-1 subj=? res=success
Oct 01 16:37:28 raspi3.lab systemd[1]: Reloaded Security Auditing Service.
Oct 01 16:38:18 raspi3.lab systemd[1]: Reloading Security Auditing Service.
Oct 01 16:38:18 raspi3.lab auditd[278]: config change requested by pid=-1
auid=4294967295 subj=?
Oct 01 16:38:18 raspi3.lab auditd[278]: audit(1475311098.716:2108)
op=reconfigure state=changed auid=4294967295 pid=-1 subj=? res=success
Oct 01 16:38:18 raspi3.lab systemd[1]: Reloaded Security Auditing Service.
While my `/var/log/audit/audit.log` was full with lines of "SERVICE_START"
& "SERVICE_STOP"
type=SERVICE_START msg=audit(1475313700.696:276): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=?
res=success'
type=SERVICE_STOP msg=audit(1475313710.836:277): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=?
res=success'
Sincerly,
CHING YI.
2:14 a.m.
On Sun, Oct 2, 2016 at 12:20 AM, Steve Grubb <sgrubb(a)redhat.com> wrote:
On Saturday, October 1, 2016 5:47:47 PM EDT C.y wrote:
> Hi all,
>
>
> I have fedora-server-24 installed on my raspberry-pi-3, following the
guide
> https://fedoraproject.org/wiki/Raspberry_Pi.
>
> Once I get my raspberry pi boot up, there were error mentioning that
"audit
> support not in kernel", which I believed were then resolved after I
rebuild
> my kernel.
>
> However, I got stuck when I tried to add rule using `auditctl` command as
> below:
> `# auditctl -w /etc/passwd -p wa -k passwd_changes`
> Error sending add rule data request (Invalid argument)
Hmm. I wonder if 'ausyscall open' gives you syscalls.
`# ausyscall open` returns as below. So I suppose the answer is
yes?(correct me if I'm wrong)
open 5
mq_open 274
openat 322
perf_event_open 364
open_by_handle_at 371
> I tried to search for solution but it lead me to a bug that were already
> been solved like years ago. Can anyone tell me if I am in the right way
of
> getting auditd works on raspberry pi? Were the problem I've faced were
> already a known issue?
>
> Below are my system information and some logs/details when I tried to
> diagnosis the problem and thanks a lot for your help in advance!
>
> `# uname -a`
> Linux raspi3.lab 4.4.23-v7+ #2 SMP Sat Oct 1 15:24:41 CST 2016 armv7l
> armv7l armv7l GNU/Linux
I also wonder if we have a mismatch here. Is that armv seventy one or armv
seven-el? Its coded in audit as seventy one.
It's 7-el.
`# uname -a | grep 7l` (7-el) returns
Linux raspi3.lab 4.4.23-v7+ #2 SMP Sat Oct 1 15:24:41 CST 2016 armv7l
armv7l armv7l GNU/Linux
Sincerly,
CHING YI.
Sincerly,
CHING YI.
On Sun, Oct 2, 2016 at 12:20 AM, Steve Grubb <sgrubb(a)redhat.com> wrote:
On Saturday, October 1, 2016 5:47:47 PM EDT C.y wrote:
> Hi all,
>
>
> I have fedora-server-24 installed on my raspberry-pi-3, following the
guide
> https://fedoraproject.org/wiki/Raspberry_Pi.
>
> Once I get my raspberry pi boot up, there were error mentioning that
"audit
> support not in kernel", which I believed were then resolved after I
rebuild
> my kernel.
>
> However, I got stuck when I tried to add rule using `auditctl` command as
> below:
> `# auditctl -w /etc/passwd -p wa -k passwd_changes`
> Error sending add rule data request (Invalid argument)
Hmm. I wonder if 'ausyscall open' gives you syscalls.
> I tried to search for solution but it lead me to a bug that were already
> been solved like years ago. Can anyone tell me if I am in the right way
of
> getting auditd works on raspberry pi? Were the problem I've faced were
> already a known issue?
>
> Below are my system information and some logs/details when I tried to
> diagnosis the problem and thanks a lot for your help in advance!
>
> `# uname -a`
> Linux raspi3.lab 4.4.23-v7+ #2 SMP Sat Oct 1 15:24:41 CST 2016 armv7l
> armv7l armv7l GNU/Linux
I also wonder if we have a mismatch here. Is that armv seventy one or armv
seven-el? Its coded in audit as seventy one.
>
> -Steve
>
> > `# modprobe configs ; gunzip -dc /proc/config.gz | grep AUDIT`
> > CONFIG_AUDIT=y
> > CONFIG_NETFILTER_XT_TARGET_AUDIT=m
> > CONFIG_AUDIT_GENERIC=y
> > # CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
> >
> > `# systemctl status auditd.service`
> > ● auditd.service - Security Auditing Service
> > Loaded: loaded (/usr/lib/systemd/system/auditd.service; enabled;
> vendor
> > preset: enabled)
> > Active: active (running) since Fri 2016-02-12 00:28:07 CST; 7 months
> 19
> > days ago
> > Process: 1553 ExecReload=/bin/kill -HUP $MAINPID (code=exited,
> > status=0/SUCCESS)
> > Process: 279 ExecStartPost=/sbin/augenrules --load (code=exited,
> > status=1/FAILURE)
> > Main PID: 278 (auditd)
> > CGroup: /system.slice/auditd.service
> > └─278 /sbin/auditd -n
> >
> > Oct 01 16:36:53 raspi3.lab auditd[278]: audit(1475311013.356:8458)
> > op=reconfigure state=changed auid=4294967295 pid=-1 subj=? res=success
> > Oct 01 16:36:53 raspi3.lab systemd[1]: Reloaded Security Auditing
> Service.
> > Oct 01 16:37:28 raspi3.lab systemd[1]: Reloading Security Auditing
> Service.
> > Oct 01 16:37:28 raspi3.lab auditd[278]: config change requested by pid=-1
> > auid=4294967295 subj=?
> > Oct 01 16:37:28 raspi3.lab auditd[278]: audit(1475311048.046:257)
> > op=reconfigure state=changed auid=4294967295 pid=-1 subj=? res=success
> > Oct 01 16:37:28 raspi3.lab systemd[1]: Reloaded Security Auditing
> Service.
> > Oct 01 16:38:18 raspi3.lab systemd[1]: Reloading Security Auditing
> Service.
> > Oct 01 16:38:18 raspi3.lab auditd[278]: config change requested by pid=-1
> > auid=4294967295 subj=?
> > Oct 01 16:38:18 raspi3.lab auditd[278]: audit(1475311098.716:2108)
> > op=reconfigure state=changed auid=4294967295 pid=-1 subj=? res=success
> > Oct 01 16:38:18 raspi3.lab systemd[1]: Reloaded Security Auditing
> Service.
> >
> > While my `/var/log/audit/audit.log` was full with lines of
> "SERVICE_START"
> > & "SERVICE_STOP"
> > type=SERVICE_START msg=audit(1475313700.696:276): pid=1 uid=0
> > auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher
> > comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=?
> terminal=?
> > res=success'
> > type=SERVICE_STOP msg=audit(1475313710.836:277): pid=1 uid=0
> > auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher
> > comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=?
> terminal=?
> > res=success'
> >
> >
> > Sincerly,
> > CHING YI.
>
>
>
3003
days inactive
3004
days old
linux-audit@lists.linux-audit.osci.io
2 comments
2 participants
participants (2)
-
C.y -
Steve Grubb