6 p.m.
If I add a new user with the "useradd" utility, it submits a ADD_USER
event, but the event itself has no interpretation for the new UID.
IOW, the "id" field is numeric and the translated data at the end of the
raw record has "ID=unknown(number)".
I'm guessing it is because until the user data has been successfully
entered, there is no translation. Perhaps the event submission should
wait until that happens?
I may be able to dig out the name from other related generated events,
but that is kind of a pain.
audit-2.8.5, RHEL 7.6
Thx,
LCB
--
Lenny Bruzenak
MagitekLTD
7:44 a.m.
On Thursday, May 16, 2019 7:00:38 PM EDT Lenny Bruzenak wrote:
If I add a new user with the "useradd" utility, it submits
a ADD_USER
event, but the event itself has no interpretation for the new UID.
What exactly was typed in at the command line? This is caused by this line of
code:
https://github.com/linux-audit/audit-userspace/blob/master/lib/
audit_logging.c#L480
The idea is that we want to rely on the number rather than the name. However,
the log event is supposed to be created after passwd and shadow have been
updated. So, the audit daemon should be able to resolve the event.
Maybe useradd needs to be straced to see if it does everything in one shot or
if it sends multiple events as it builds the user.
IOW, the "id" field is numeric and the translated data at
the end of the
raw record has "ID=unknown(number)".
I'm guessing it is because until the user data has been successfully
entered, there is no translation. Perhaps the event submission should
wait until that happens?
I'd say strace useradd will have the answer.
I may be able to dig out the name from other related generated
events,
but that is kind of a pain.
Right. Let's see what the root cause is and then what we can do about it.
-Steve
10:39 a.m.
On 5/17/19 7:44 AM, Steve Grubb wrote:
On Thursday, May 16, 2019 7:00:38 PM EDT Lenny Bruzenak wrote:
> If I add a new user with the "useradd" utility, it submits a ADD_USER
> event, but the event itself has no interpretation for the new UID.
What exactly was typed in at the command line?
# useradd -c iam2 -G issm iam2
This is caused by this line of
code:
https://github.com/linux-audit/audit-userspace/blob/master/lib/
audit_logging.c#L480
The idea is that we want to rely on the number rather than the name. However,
the log event is supposed to be created after passwd and shadow have been
updated. So, the audit daemon should be able to resolve the event.
Maybe useradd needs to be straced to see if it does everything in one shot or
if it sends multiple events as it builds the user.
I think it is adding the events independently IIUC what the strace
results say. Starting with the audit_open getting the netlink socket:
...
socket(AF_NETLINK, SOCK_RAW, NETLINK_AUDIT) = 3
sendto(3, "t\0\0\0\\\4\5\0\1\0\0\0\0\0\0\0op=add-group acc"..., 116, 0,
{sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 116
recvfrom(3,
"$\0\0\0\2\0\0\0\1\0\0\0006]\0\0\0\0\0\0t\0\0\0\\\4\5\0\1\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\1\0\0\0006]\0\0\0\0\0\0t\0\0\0\\\4\5\0\1\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
sendto(3, "p\0\0\0Z\4\5\0\2\0\0\0\0\0\0\0op=add-user id=1"..., 112, 0,
{sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 112
recvfrom(3,
"$\0\0\0\2\0\0\0\2\0\0\0006]\0\0\0\0\0\0p\0\0\0Z\4\5\0\2\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\2\0\0\0006]\0\0\0\0\0\0p\0\0\0Z\4\5\0\2\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
sendto(3, "\210\0\0\0N\4\5\0\3\0\0\0\0\0\0\0op=add-user-to-g"..., 136,
0, {sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 136
recvfrom(3,
"$\0\0\0\2\0\0\0\3\0\0\0006]\0\0\0\0\0\0\210\0\0\0N\4\5\0\3\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\3\0\0\0006]\0\0\0\0\0\0\210\0\0\0N\4\5\0\3\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
sendto(3, "\210\0\0\0N\4\5\0\4\0\0\0\0\0\0\0op=add-to-shadow"..., 136,
0, {sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 136
recvfrom(3,
"$\0\0\0\2\0\0\0\4\0\0\0006]\0\0\0\0\0\0\210\0\0\0N\4\5\0\4\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\4\0\0\0006]\0\0\0\0\0\0\210\0\0\0N\4\5\0\4\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
sendto(3, "t\0\0\0N\4\5\0\5\0\0\0\0\0\0\0op=add-home-dir "..., 116, 0,
{sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 116
recvfrom(3,
"$\0\0\0\2\0\0\0\5\0\0\0006]\0\0\0\0\0\0t\0\0\0N\4\5\0\5\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\5\0\0\0006]\0\0\0\0\0\0t\0\0\0N\4\5\0\5\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
That's all the FD 3 activity.
> IOW, the "id" field is numeric and the translated data at the end of the
> raw record has "ID=unknown(number)".
>
> I'm guessing it is because until the user data has been successfully
> entered, there is no translation. Perhaps the event submission should
> wait until that happens?
I'd say strace useradd will have the answer.
Let me know if the above isn't sufficient; I'll search again.
> I may be able to dig out the name from other related generated
events,
> but that is kind of a pain.
Right. Let's see what the root cause is and then what we can do about it.
Thanks Steve.
I see plenty of audit events correlating to the above strace calls; e.g.:
node=audit type=ADD_GROUP msg=audit(05/15/2019 16:28:38.510:1684) :
pid=25284 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-group acct=iam2 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
...
node=audit type=ADD_USER msg=audit(05/15/2019 16:28:38.516:1686) :
pid=25284 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam2 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
...
node=audit type=USER_MGMT msg=audit(05/15/2019 16:28:38.516:1687) :
pid=25284 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user-to-group grp=issm acct=iam2 exe=/usr/sbin/useradd
hostname=audit addr=? terminal=pts/1 res=success'
...
node=audit type=USER_MGMT msg=audit(05/15/2019 16:28:38.516:1688) :
pid=25284 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-to-shadow-group grp=issm acct=iam2 exe=/usr/sbin/useradd
hostname=audit addr=? terminal=pts/1 res=success'
...
Then the user's home file setup events.
But wait, there's more and it isn't good at all. Here's what I did next,
because I wanted to capture the events from an entirely new user.
Previously, I was doing "useradd" as above followed by "userdel -rf
iam2". Also iam3. Then I did:
[root@audit ~]# useradd -c iam10 -G issm iam10
[root@audit ~]# ausearch -i -ts recent -m ADD_USER
----
node=audit type=ADD_USER msg=audit(05/15/2019 16:43:28.456:1812) :
pid=26210 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam3 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
[root@audit ~]# ausearch -i -ts recent -m ADD_USER
Note that although the user id is filled in, it is wrong. I thought that
must be from an earlier add, so I did:
[root@audit ~]# userdel iam10 -rf
[root@audit ~]# ausearch -i -ts recent -m ADD_USER
----
node=audit type=ADD_USER msg=audit(05/15/2019 16:43:28.456:1812) :
pid=26210 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam3 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
[root@audit ~]# useradd -c iam10 -G issm iam10
[root@audit ~]# ausearch -i -ts recent -m ADD_USER
----
node=audit type=ADD_USER msg=audit(05/15/2019 16:43:28.456:1812) :
pid=26210 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam3 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
----
node=audit type=ADD_USER msg=audit(05/15/2019 16:48:58.746:1965) :
pid=26555 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam3 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
So after sitting there in stunned silence a bit, I did:
[root@audit ~]# date
Wed May 15 16:49:07 GMT 2019
[root@audit ~]# ausearch -r -a 1965 -ts recent
node=audit type=ADD_USER msg=audit(1557938938.746:1965): pid=26555 uid=0
auid=1000 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=1003 exe="/usr/sbin/useradd" hostname=audit addr=?
terminal=pts/1 res=success'UID="root" AUID="iam1"
ID="iam3"
[root@audit ~]# grep iam /etc/passwd
iam1:x:1000:1000:iam1:/home/iam1:/bin/bash
iam2:x:1002:1002:iam2:/home/iam2:/bin/bash
iam10:x:1003:1003:iam10:/home/iam10:/bin/bash
So now I'm truly confused about what is happening.
Thx,
LCB
--
Lenny Bruzenak
MagitekLTD
2:59 p.m.
On Monday, May 20, 2019 11:39:09 AM EDT Lenny Bruzenak wrote:
On 5/17/19 7:44 AM, Steve Grubb wrote:
> On Thursday, May 16, 2019 7:00:38 PM EDT Lenny Bruzenak wrote:
>> If I add a new user with the "useradd" utility, it submits a ADD_USER
>> event, but the event itself has no interpretation for the new UID.
>
> What exactly was typed in at the command line?
# useradd -c iam2 -G issm iam2
> This is caused by this line of
> code:
>
> https://github.com/linux-audit/audit-userspace/blob/master/lib/
> audit_logging.c#L480
>
> The idea is that we want to rely on the number rather than the name.
> However, the log event is supposed to be created after passwd and shadow
> have been updated. So, the audit daemon should be able to resolve the
> event.
>
> Maybe useradd needs to be straced to see if it does everything in one
> shot or if it sends multiple events as it builds the user.
I think it is adding the events independently IIUC what the strace
results say. Starting with the audit_open getting the netlink socket:
...
socket(AF_NETLINK, SOCK_RAW, NETLINK_AUDIT) = 3
sendto(3, "t\0\0\0\\\4\5\0\1\0\0\0\0\0\0\0op=add-group acc"..., 116, 0,
{sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 116
recvfrom(3,
"$\0\0\0\2\0\0\0\1\0\0\0006]\0\0\0\0\0\0t\0\0\0\\\4\5\0\1\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\1\0\0\0006]\0\0\0\0\0\0t\0\0\0\\\4\5\0\1\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
sendto(3, "p\0\0\0Z\4\5\0\2\0\0\0\0\0\0\0op=add-user id=1"..., 112, 0,
{sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 112
recvfrom(3,
"$\0\0\0\2\0\0\0\2\0\0\0006]\0\0\0\0\0\0p\0\0\0Z\4\5\0\2\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\2\0\0\0006]\0\0\0\0\0\0p\0\0\0Z\4\5\0\2\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
sendto(3, "\210\0\0\0N\4\5\0\3\0\0\0\0\0\0\0op=add-user-to-g"..., 136,
0, {sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 136
recvfrom(3,
"$\0\0\0\2\0\0\0\3\0\0\0006]\0\0\0\0\0\0\210\0\0\0N\4\5\0\3\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\3\0\0\0006]\0\0\0\0\0\0\210\0\0\0N\4\5\0\3\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
sendto(3, "\210\0\0\0N\4\5\0\4\0\0\0\0\0\0\0op=add-to-shadow"..., 136,
0, {sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 136
recvfrom(3,
"$\0\0\0\2\0\0\0\4\0\0\0006]\0\0\0\0\0\0\210\0\0\0N\4\5\0\4\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\4\0\0\0006]\0\0\0\0\0\0\210\0\0\0N\4\5\0\4\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
sendto(3, "t\0\0\0N\4\5\0\5\0\0\0\0\0\0\0op=add-home-dir "..., 116, 0,
{sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 116
recvfrom(3,
"$\0\0\0\2\0\0\0\5\0\0\0006]\0\0\0\0\0\0t\0\0\0N\4\5\0\5\0\0\0"...,
8988, MSG_PEEK|MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0,
groups=00000000}, [12]) = 36
recvfrom(3,
"$\0\0\0\2\0\0\0\5\0\0\0006]\0\0\0\0\0\0t\0\0\0N\4\5\0\5\0\0\0"...,
8988, MSG_DONTWAIT, {sa_family=AF_NETLINK, pid=0, groups=00000000},
[12]) = 36
That's all the FD 3 activity.
>> IOW, the "id" field is numeric and the translated data at the end of
the
>> raw record has "ID=unknown(number)".
>>
>> I'm guessing it is because until the user data has been successfully
>> entered, there is no translation. Perhaps the event submission should
>> wait until that happens?
>
> I'd say strace useradd will have the answer.
Let me know if the above isn't sufficient; I'll search again.
So...I went digging through the source code of useradd.c. In main is this
comment:
/*
* Do the hard stuff:
* - open the files,
* - create the user entries,
* - create the home directory,
* - create user mail spool,
* - flush nscd caches for passwd and group services,
* - then close and update the files.
*/
If you dig around, you'll see in the above process it calls usr_update().
This is where the audit event is. The very next function call is close_files.
This is where it actually writes to the files where it would be visible to
auditd. So, it looks like auditing in shadow-utils is busted.
I also see where its calling pam_tally2 which is deprecated for years. It
should be calling faillock. I'll chat with upstream maintainers.
-Steve
>> I may be able to dig out the name from other related
generated events,
>> but that is kind of a pain.
>
> Right. Let's see what the root cause is and then what we can do about it.
Thanks Steve.
I see plenty of audit events correlating to the above strace calls; e.g.:
node=audit type=ADD_GROUP msg=audit(05/15/2019 16:28:38.510:1684) :
pid=25284 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-group acct=iam2 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
...
node=audit type=ADD_USER msg=audit(05/15/2019 16:28:38.516:1686) :
pid=25284 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam2 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
...
node=audit type=USER_MGMT msg=audit(05/15/2019 16:28:38.516:1687) :
pid=25284 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user-to-group grp=issm acct=iam2 exe=/usr/sbin/useradd
hostname=audit addr=? terminal=pts/1 res=success'
...
node=audit type=USER_MGMT msg=audit(05/15/2019 16:28:38.516:1688) :
pid=25284 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-to-shadow-group grp=issm acct=iam2 exe=/usr/sbin/useradd
hostname=audit addr=? terminal=pts/1 res=success'
...
Then the user's home file setup events.
But wait, there's more and it isn't good at all. Here's what I did next,
because I wanted to capture the events from an entirely new user.
Previously, I was doing "useradd" as above followed by "userdel -rf
iam2". Also iam3. Then I did:
[root@audit ~]# useradd -c iam10 -G issm iam10
[root@audit ~]# ausearch -i -ts recent -m ADD_USER
----
node=audit type=ADD_USER msg=audit(05/15/2019 16:43:28.456:1812) :
pid=26210 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam3 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
[root@audit ~]# ausearch -i -ts recent -m ADD_USER
Note that although the user id is filled in, it is wrong. I thought that
must be from an earlier add, so I did:
[root@audit ~]# userdel iam10 -rf
[root@audit ~]# ausearch -i -ts recent -m ADD_USER
----
node=audit type=ADD_USER msg=audit(05/15/2019 16:43:28.456:1812) :
pid=26210 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam3 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
[root@audit ~]# useradd -c iam10 -G issm iam10
[root@audit ~]# ausearch -i -ts recent -m ADD_USER
----
node=audit type=ADD_USER msg=audit(05/15/2019 16:43:28.456:1812) :
pid=26210 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam3 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
----
node=audit type=ADD_USER msg=audit(05/15/2019 16:48:58.746:1965) :
pid=26555 uid=root auid=iam1 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=iam3 exe=/usr/sbin/useradd hostname=audit addr=?
terminal=pts/1 res=success'
So after sitting there in stunned silence a bit, I did:
[root@audit ~]# date
Wed May 15 16:49:07 GMT 2019
[root@audit ~]# ausearch -r -a 1965 -ts recent
node=audit type=ADD_USER msg=audit(1557938938.746:1965): pid=26555 uid=0
auid=1000 ses=1
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
msg='op=add-user id=1003 exe="/usr/sbin/useradd" hostname=audit addr=?
terminal=pts/1 res=success'UID="root" AUID="iam1"
ID="iam3"
[root@audit ~]# grep iam /etc/passwd
iam1:x:1000:1000:iam1:/home/iam1:/bin/bash
iam2:x:1002:1002:iam2:/home/iam2:/bin/bash
iam10:x:1003:1003:iam10:/home/iam10:/bin/bash
So now I'm truly confused about what is happening.
Thx,
LCB
3:05 p.m.
On 5/20/19 2:59 PM, Steve Grubb wrote:
So...I went digging through the source code of useradd.c. In main is
this
comment:
/*
* Do the hard stuff:
* - open the files,
* - create the user entries,
* - create the home directory,
* - create user mail spool,
* - flush nscd caches for passwd and group services,
* - then close and update the files.
*/
If you dig around, you'll see in the above process it calls usr_update().
This is where the audit event is. The very next function call is close_files.
This is where it actually writes to the files where it would be visible to
auditd. So, it looks like auditing in shadow-utils is busted.
I also see where its calling pam_tally2 which is deprecated for years. It
should be calling faillock. I'll chat with upstream maintainers.
-Steve
Thank you Steve, much appreciated! If they are able to provide a patch,
would you mind asking them to send me a link and I'll test it ASAP?
LCB
--
Lenny Bruzenak
MagitekLTD
3:12 p.m.
On Monday, May 20, 2019 4:05:55 PM EDT Lenny Bruzenak wrote:
On 5/20/19 2:59 PM, Steve Grubb wrote:
> So...I went digging through the source code of useradd.c. In main is this
>
> comment:
> /*
>
> * Do the hard stuff:
> * - open the files,
> * - create the user entries,
> * - create the home directory,
> * - create user mail spool,
> * - flush nscd caches for passwd and group services,
> * - then close and update the files.
> */
>
> If you dig around, you'll see in the above process it calls usr_update().
> This is where the audit event is. The very next function call is
> close_files. This is where it actually writes to the files where it
> would be visible to auditd. So, it looks like auditing in shadow-utils
> is busted.
>
> I also see where its calling pam_tally2 which is deprecated for years. It
> should be calling faillock. I'll chat with upstream maintainers.
>
> -Steve
Thank you Steve, much appreciated! If they are able to provide a patch,
would you mind asking them to send me a link and I'll test it ASAP?
Sure. But I think this is an architectural issue and won't be a quick fix.
Also, I think this race is limited to useradd and groupadd. For everything
else, the mapping should be on disk and visible.
-Steve
12:34 p.m.
On Monday, May 20, 2019 4:05:55 PM EDT Lenny Bruzenak wrote:
On 5/20/19 2:59 PM, Steve Grubb wrote:
> So...I went digging through the source code of useradd.c. In main is this
>
> comment:
> /*
>
> * Do the hard stuff:
> * - open the files,
> * - create the user entries,
> * - create the home directory,
> * - create user mail spool,
> * - flush nscd caches for passwd and group services,
> * - then close and update the files.
> */
>
> If you dig around, you'll see in the above process it calls usr_update().
> This is where the audit event is. The very next function call is
> close_files. This is where it actually writes to the files where it
> would be visible to auditd. So, it looks like auditing in shadow-utils
> is busted.
>
> I also see where its calling pam_tally2 which is deprecated for years. It
> should be calling faillock. I'll chat with upstream maintainers.
Thank you Steve, much appreciated! If they are able to provide a patch,
would you mind asking them to send me a link and I'll test it ASAP?
I think this is the right fix:
diff -urp shadow-4.6.orig/src/useradd.c shadow-4.6/src/useradd.c
--- shadow-4.6.orig/src/useradd.c 2019-05-21 08:26:12.533328554 -0400
+++ shadow-4.6/src/useradd.c 2019-05-22 12:21:46.305293997 -0400
@@ -1955,9 +1955,14 @@ static void usr_update (void)
#endif /* ENABLE_SUBIDS */
#ifdef WITH_AUDIT
+ /*
+ * Even though we have the ID of the user, we won't send it now
+ * because its not written to disk yet. After close_files it is
+ * and we can use the real ID thereafter.
+ */
audit_logger (AUDIT_ADD_USER, Prog,
"add-user",
- user_name, (unsigned int) user_id,
+ user_name, AUDIT_NO_ID,
SHADOW_AUDIT_SUCCESS);
#endif
/*
1:23 p.m.
On 5/22/19 12:34 PM, Steve Grubb wrote:
I think this is the right fix:
diff -urp shadow-4.6.orig/src/useradd.c shadow-4.6/src/useradd.c
--- shadow-4.6.orig/src/useradd.c 2019-05-21 08:26:12.533328554 -0400
+++ shadow-4.6/src/useradd.c 2019-05-22 12:21:46.305293997 -0400
@@ -1955,9 +1955,14 @@ static void usr_update (void)
#endif /* ENABLE_SUBIDS */
#ifdef WITH_AUDIT
+ /*
+ * Even though we have the ID of the user, we won't send it now
+ * because its not written to disk yet. After close_files it is
+ * and we can use the real ID thereafter.
+ */
audit_logger (AUDIT_ADD_USER, Prog,
"add-user",
- user_name, (unsigned int) user_id,
+ user_name, AUDIT_NO_ID,
SHADOW_AUDIT_SUCCESS);
#endif
/*
I tested this and it looks good. Thanks Steve, I really appreciate the help.
LCB
--
Lenny Bruzenak
MagitekLTD
2155
days inactive
2161
days old
linux-audit@lists.linux-audit.osci.io
7 comments
2 participants
participants (2)
-
Lenny Bruzenak -
Steve Grubb