[PATCH 1/1] Added exe field to audit core dump signal log
by Paul Davies C
Currently when the coredump signals are logged by the audit system , the
actual path to the executable is not logged. Without details of exe , the
system admin may not have an exact idea on what program failed.
This patch changes the audit_log_task() so that the path to the exe is also
logged.
Signed-off-by: Paul Davies C <pauldaviesc(a)gmail.com>
---
kernel/auditsc.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 9845cb3..988de72 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -2353,6 +2353,7 @@ static void audit_log_task(struct audit_buffer *ab)
kuid_t auid, uid;
kgid_t gid;
unsigned int sessionid;
+ struct mm_struct *mm = current->mm;
auid = audit_get_loginuid(current);
sessionid = audit_get_sessionid(current);
@@ -2366,6 +2367,12 @@ static void audit_log_task(struct audit_buffer *ab)
audit_log_task_context(ab);
audit_log_format(ab, " pid=%d comm=", current->pid);
audit_log_untrustedstring(ab, current->comm);
+ if (mm) {
+ down_read(&mm->mmap_sem);
+ if (mm->exe_file)
+ audit_log_d_path(ab, " exe=", &mm->exe_file->f_path);
+ up_read(&mm->mmap_sem);
+ }
}
static void audit_log_abend(struct audit_buffer *ab, char *reason, long signr)
--
1.7.9.5
9 years, 5 months
[PATCH v10 0/3] arm64: Add audit support
by AKASHI Takahiro
(This patchset was already acked by the maintainers, and
re-targeting v3.17. See change history.)
(I don't think that discussions below about ptrace() have impact on
this patchset.
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/268923.html
)
This patchset adds system call audit support on arm64.
Both 32-bit (AUDIT_ARCH_ARM) and 64-bit tasks (AUDIT_ARCH_AARCH64)
are supported. Since arm64 has the exact same set of system calls
on LE and BE, we don't care about endianness (or more specifically
__AUDIT_ARCH_64BIT bit in AUDIT_ARCH_*).
This patch should work correctly with:
* userspace audit tool (v2.3.6 or later)
This code was tested on both 32-bit and 64-bit LE userland
in the following two ways:
1) basic operations with auditctl/autrace
# auditctl -a exit,always -S openat -F path=/etc/inittab
# auditctl -a exit,always -F dir=/tmp -F perm=rw
# auditctl -a task,always
# autrace /bin/ls
by comparing output from autrace with one from strace
2) audit-test-code (+ my workarounds for arm/arm64)
by running "audit-tool", "filter" and "syscalls" test categories.
Changes v9 -> v10:
* rebased on 3.16-rc3
* included Catalin's patch[1/3] and added more syscall definitions for 3.16
Changes v8 -> v9:
* rebased on 3.15-rc, especially due to the change of syscall_get_arch()
interface [1,2/2]
Changes v7 -> v8:
* aligned with the change in "audit: generic compat system call audit
support" v5 [1/2]
* aligned with the change in "arm64: split syscall_trace() into separate
functions for enter/exit" v5 [2/2]
Changes v6 -> v7:
* changed an include file in syscall.h from <linux/audit.h> to
<uapi/linux/audit.h> [1/2]
* aligned with the patch, "arm64: split syscall_trace() into separate
functions for enter/exit" [2/2]
Changes v5 -> v6:
* removed and put "arm64: Add regs_return_value() in syscall.h" patch into
a separate set
* aligned with the change in "arm64: make a single hook to syscall_trace()
for all syscall features" v3 [1/2]
Changes v4 -> v5:
* rebased to 3.14-rcX
* added a guard against TIF_SYSCALL_AUDIT [3/3]
* aligned with the change in "arm64: make a single hook to syscall_trace()
for all syscall features" v2 [3/3]
Changes v3 -> v4:
* Modified to sync with the patch, "make a single hook to syscall_trace()
for all syscall features"
* aligned with "audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL" patch
Changes v2 -> v3:
* Remove asm/audit.h.
See "generic compat syscall audit support" patch v4
* Remove endianness dependency, ie. AUDIT_ARCH_ARMEB/AARCH64EB.
* Remove kernel/syscalls/Makefile which was used to create unistd32.h.
See Catalin's "Add __NR_* definitions for compat syscalls" patch
Changes v1 -> v2:
* Modified to utilize "generic compat system call audit" [3/6, 4/6, 5/6]
Please note that a required header, unistd_32.h, is automatically
generated from unistd32.h.
* Refer to regs->orig_x0 instead of regs->x0 as the first argument of
system call in audit_syscall_entry() [6/6]
* Include "Add regs_return_value() in syscall.h" patch [2/6],
which was not intentionally included in v1 because it could be added
by "kprobes support".
AKASHI Takahiro (2):
arm64: Add audit support
arm64: audit: Add audit hook in syscall_trace_enter/exit()
Catalin Marinas (1):
arm64: Add __NR_* definitions for compat syscalls
arch/arm64/Kconfig | 2 +
arch/arm64/include/asm/syscall.h | 14 +
arch/arm64/include/asm/unistd.h | 17 +
arch/arm64/include/asm/unistd32.h | 1166 ++++++++++++++++++++++++-------------
arch/arm64/kernel/entry.S | 1 -
arch/arm64/kernel/kuser32.S | 2 +-
arch/arm64/kernel/ptrace.c | 7 +
arch/arm64/kernel/signal32.c | 2 +-
arch/arm64/kernel/sys_compat.c | 2 +-
include/uapi/linux/audit.h | 1 +
10 files changed, 810 insertions(+), 404 deletions(-)
--
1.7.9.5
9 years, 10 months
[PATCH] TaskTracker : Simplified thread information tracker.
by Tetsuo Handa
Yesterday I went to LinuxCon Japan 2014 and stopped at Red Hat's booth
and Oracle's booth. I explained about this module ( using page 92 of
http://I-love.SAKURA.ne.jp/tomoyo/LCJ2014-en.pdf ) and got positive
responses from persons who have experienced troubleshooting jobs.
I was convinced that I am not the only person who is bothered by lack of
process history information in the logs. Therefore, I repost this module
toward inclusion into mainline Linux kernel.
Changes from previous version ( http://lwn.net/Articles/575044/ ):
(1) Assign a value to "u32 *seclen" in addition to "char *secdata"
at security_task_getsecid() hook.
(2) Make calculation of time stamp a bit faster.
Background:
When an unexpected system event (e.g. reboot) occurs, the administrator may
want to identify which application triggered the event. System call auditing
could be used for recording such event. However, the audit log may not be
able to provide sufficient information for identifying the application
because the audit log does not reflect how the program was executed.
I sometimes receive "which application triggered the event" questions on RHEL
systems. TOMOYO security module can track how the program was executed, but
TOMOYO is not yet available in Fedora/RHEL distributions.
Although subj= field is added to the audit log if SELinux is not disabled,
SELinux is too difficult to customize as fine grained as I expect in order to
reflect how the program was executed. Therefore, I'm currently using AKARI
and SystemTap for emulating TOMOYO-like tracing.
But AKARI and SystemTap do not help unless the kernel module is loaded before
the unexpected system event occurs. Generally, the administrator is failing
to record the first event, and has to wait for the same event to occur again
after loading the kernel module and/or configuring auditing. I came to think
that we want a built-in kernel routine which is automatically started upon
boot so that we don't fail to record the first event.
What I did:
Assuming that multiple concurrent LSM support comes in the near future,
I wrote a trivial LSM module which emits TOMOYO-like information into the
audit logs.
Usage:
Just register this LSM module. No configuration is needed. You will get
history of current thread in the form of comm name and time stamp pairs
in the subj= field of audit logs like examples shown in the patch
description.
----------
>From ff68d3a4cd496bd263d2939848777fffc30cbc0b Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp>
Date: Fri, 23 May 2014 21:31:56 +0900
Subject: [PATCH] TaskTracker : Simplified thread information tracker.
Existing audit logs generated via system call auditing functionality include
current thread's comm name. But it is not always sufficient for identifying
which application has requested specific operations because comm name does not
reflect history of current thread.
This security module adds functionality for adding current thread's history
information like TOMOYO security module does, expecting that this module can
help us getting more information from system call auditing functionality.
type=USER_LOGIN msg=audit(1400879947.084:24): pid=4308 uid=0 auid=0 ses=2
subj="swapper/0(2014/05/23-21:17:30)=>init(2014/05/23-21:17:33)=>
switch_root(2014/05/23-21:17:34)=>init(2014/05/23-21:17:34)=>
sh(2014/05/23-21:17:56)=>mingetty(2014/05/23-21:17:56)=>
login(2014/05/23-21:19:05)" msg='op=login id=0 exe="/bin/login" hostname=?
addr=? terminal=tty1 res=success'
type=SYSCALL msg=audit(1400880014.444:26): arch=40000003 syscall=11
success=yes exit=0 a0=8140f78 a1=812b7d8 a2=812b248 a3=812b7d8 items=2
ppid=4323 pid=4355 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0
fsgid=0 tty=pts0 ses=1 comm="tail" exe="/usr/bin/tail"
subj="swapper/0(2014/05/23-21:17:30)=>init(2014/05/23-21:17:33)=>
switch_root(2014/05/23-21:17:34)=>init(2014/05/23-21:17:34)=>
sh(2014/05/23-21:17:37)=>rc(2014/05/23-21:17:37)=>
S55sshd(2014/05/23-21:17:53)=>sshd(2014/05/23-21:17:53)=>
sshd(2014/05/23-21:18:17)=>bash(2014/05/23-21:18:21)=>
tail(2014/05/23-21:20:14)" key=(null)
Signed-off-by: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp>
---
security/Kconfig | 6 +
security/Makefile | 2 +
security/tasktracker/Kconfig | 35 +++++
security/tasktracker/Makefile | 1 +
security/tasktracker/tasktracker.c | 282 ++++++++++++++++++++++++++++++++++++
5 files changed, 326 insertions(+), 0 deletions(-)
create mode 100644 security/tasktracker/Kconfig
create mode 100644 security/tasktracker/Makefile
create mode 100644 security/tasktracker/tasktracker.c
diff --git a/security/Kconfig b/security/Kconfig
index beb86b5..14e7d27 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -122,6 +122,7 @@ source security/smack/Kconfig
source security/tomoyo/Kconfig
source security/apparmor/Kconfig
source security/yama/Kconfig
+source security/tasktracker/Kconfig
source security/integrity/Kconfig
@@ -132,6 +133,7 @@ choice
default DEFAULT_SECURITY_TOMOYO if SECURITY_TOMOYO
default DEFAULT_SECURITY_APPARMOR if SECURITY_APPARMOR
default DEFAULT_SECURITY_YAMA if SECURITY_YAMA
+ default DEFAULT_SECURITY_TT if SECURITY_TT
default DEFAULT_SECURITY_DAC
help
@@ -153,6 +155,9 @@ choice
config DEFAULT_SECURITY_YAMA
bool "Yama" if SECURITY_YAMA=y
+ config DEFAULT_SECURITY_TT
+ bool "TaskTracker" if SECURITY_TT=y
+
config DEFAULT_SECURITY_DAC
bool "Unix Discretionary Access Controls"
@@ -165,6 +170,7 @@ config DEFAULT_SECURITY
default "tomoyo" if DEFAULT_SECURITY_TOMOYO
default "apparmor" if DEFAULT_SECURITY_APPARMOR
default "yama" if DEFAULT_SECURITY_YAMA
+ default "tt" if DEFAULT_SECURITY_TT
default "" if DEFAULT_SECURITY_DAC
endmenu
diff --git a/security/Makefile b/security/Makefile
index 05f1c93..28a90ed 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -8,6 +8,7 @@ subdir-$(CONFIG_SECURITY_SMACK) += smack
subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo
subdir-$(CONFIG_SECURITY_APPARMOR) += apparmor
subdir-$(CONFIG_SECURITY_YAMA) += yama
+subdir-$(CONFIG_SECURITY_TT) += tasktracker
# always enable default capabilities
obj-y += commoncap.o
@@ -22,6 +23,7 @@ obj-$(CONFIG_AUDIT) += lsm_audit.o
obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/
obj-$(CONFIG_SECURITY_APPARMOR) += apparmor/
obj-$(CONFIG_SECURITY_YAMA) += yama/
+obj-$(CONFIG_SECURITY_TT) += tasktracker/
obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o
# Object integrity file lists
diff --git a/security/tasktracker/Kconfig b/security/tasktracker/Kconfig
new file mode 100644
index 0000000..6de5354
--- /dev/null
+++ b/security/tasktracker/Kconfig
@@ -0,0 +1,35 @@
+config SECURITY_TT
+ bool "TaskTracker support"
+ depends on SECURITY
+ default n
+ help
+ Existing audit logs generated via system call auditing functionality
+ include current thread's comm name. But it is not always sufficient
+ for identifying which application has requested specific operations
+ because comm name does not reflect history of current thread.
+
+ This security module adds functionality for adding current thread's
+ history information like TOMOYO security module does, expecting that
+ this module can help us getting more information from system call
+ auditing functionality.
+
+ If you are unsure how to answer this question, answer N.
+
+ Usage:
+
+ Just register this module. No configuration is needed.
+
+ You will get history of current thread in the form of
+ comm name and time stamp pairs in the subj= field of audit logs
+ like an example shown below.
+
+ type=SYSCALL msg=audit(1400880014.444:26): arch=40000003 syscall=11
+ success=yes exit=0 a0=8140f78 a1=812b7d8 a2=812b248 a3=812b7d8
+ items=2 ppid=4323 pid=4355 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0
+ egid=0 sgid=0 fsgid=0 tty=pts0 ses=1 comm="tail"
+ exe="/usr/bin/tail" subj="swapper/0(2014/05/23-21:17:30)=>
+ init(2014/05/23-21:17:33)=>switch_root(2014/05/23-21:17:34)=>
+ init(2014/05/23-21:17:34)=>sh(2014/05/23-21:17:37)=>
+ rc(2014/05/23-21:17:37)=>S55sshd(2014/05/23-21:17:53)=>
+ sshd(2014/05/23-21:17:53)=>sshd(2014/05/23-21:18:17)=>
+ bash(2014/05/23-21:18:21)=>tail(2014/05/23-21:20:14)" key=(null)
diff --git a/security/tasktracker/Makefile b/security/tasktracker/Makefile
new file mode 100644
index 0000000..15d03ce
--- /dev/null
+++ b/security/tasktracker/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SECURITY_TT) := tasktracker.o
diff --git a/security/tasktracker/tasktracker.c b/security/tasktracker/tasktracker.c
new file mode 100644
index 0000000..ec4eb0c
--- /dev/null
+++ b/security/tasktracker/tasktracker.c
@@ -0,0 +1,282 @@
+/*
+ * tasktracker.c - Simplified thread information tracker.
+ *
+ * Copyright (C) 2010-2014 Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp>
+ */
+#include <linux/security.h>
+#include <linux/binfmts.h>
+
+/* Wrapper structure for passing string buffer. */
+struct tt_record {
+ char history[1024];
+};
+
+/* Structure for representing YYYY/MM/DD hh/mm/ss. */
+struct tt_time {
+ u16 year;
+ u8 month;
+ u8 day;
+ u8 hour;
+ u8 min;
+ u8 sec;
+};
+
+/**
+ * tt_get_time - Get current time in YYYY/MM/DD hh/mm/ss format.
+ *
+ * @stamp: Pointer to "struct tt_time".
+ *
+ * Returns nothing.
+ *
+ * This function does not handle Y2038 problem.
+ */
+static void tt_get_time(struct tt_time *stamp)
+{
+ struct timeval tv;
+ static const u16 tt_eom[2][12] = {
+ { 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
+ { 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
+ };
+ u16 y = 1970;
+ u8 m;
+ bool r;
+ time_t time;
+ do_gettimeofday(&tv);
+ time = tv.tv_sec;
+ stamp->sec = time % 60;
+ time /= 60;
+ stamp->min = time % 60;
+ time /= 60;
+ stamp->hour = time % 24;
+ time /= 24;
+ if (time >= 16071) {
+ /* Start from 2014/01/01 rather than 1970/01/01. */
+ time -= 16071;
+ y += 44;
+ }
+ while (1) {
+ const unsigned short days = (y & 3) ? 365 : 366;
+ if (time < days)
+ break;
+ time -= days;
+ y++;
+ }
+ r = (y & 3) == 0;
+ for (m = 0; m < 11 && time >= tt_eom[r][m]; m++)
+ ;
+ if (m)
+ time -= tt_eom[r][m - 1];
+ stamp->year = y;
+ stamp->month = ++m;
+ stamp->day = ++time;
+}
+
+/**
+ * tt_update_record - Update "struct tt_record" for given credential.
+ *
+ * @record: Pointer to "struct tt_record".
+ *
+ * Returns nothing.
+ */
+static void tt_update_record(struct tt_record *record)
+{
+ char *cp;
+ int i;
+ struct tt_time stamp;
+ tt_get_time(&stamp);
+ /*
+ * Lockless update because current thread's record is not concurrently
+ * accessible, for "struct cred"->security is not visible from other
+ * threads because this function is called upon only boot up and
+ * successful execve() operation.
+ */
+ cp = record->history;
+ i = strlen(cp);
+ while (i >= sizeof(record->history) - (TASK_COMM_LEN * 4 + 30)) {
+ /*
+ * Since this record is not for making security decision,
+ * I don't care by-chance matching "=>" in task's commname.
+ */
+ char *cp2 = strstr(cp + 2, "=>");
+ if (!cp2)
+ return;
+ memmove(cp + 1, cp2, strlen(cp2) + 1);
+ i = strlen(cp);
+ }
+ if (!i)
+ *cp++ = '"';
+ else {
+ cp += i - 1;
+ *cp++ = '=';
+ *cp++ = '>';
+ }
+ /*
+ * Lockless read because this is current thread and being unexpectedly
+ * modified by other thread is not a fatal problem.
+ */
+ for (i = 0; i < TASK_COMM_LEN; i++) {
+ const unsigned char c = current->comm[i];
+ if (!c)
+ break;
+ else if (c == '"' || c == '\\' || c < 0x21 || c > 0x7e) {
+ *cp++ = '\\';
+ *cp++ = (c >> 6) + '0';
+ *cp++ = ((c >> 3) & 7) + '0';
+ *cp++ = (c & 7) + '0';
+ } else
+ *cp++ = c;
+ }
+ sprintf(cp, "(%04u/%02u/%02u-%02u:%02u:%02u)\"", stamp.year,
+ stamp.month, stamp.day, stamp.hour, stamp.min, stamp.sec);
+}
+
+/**
+ * tt_find_record - Find "struct tt_record" for given credential.
+ *
+ * @cred: Pointer to "struct cred".
+ *
+ * Returns pointer to "struct tt_record".
+ */
+static inline struct tt_record *tt_find_record(const struct cred *cred)
+{
+ return cred->security;
+}
+
+/**
+ * tt_cred_alloc_blank - Allocate memory for new credentials.
+ *
+ * @new: Pointer to "struct cred".
+ * @gfp: Memory allocation flags.
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tt_cred_alloc_blank(struct cred *new, gfp_t gfp)
+{
+ new->security = kzalloc(sizeof(struct tt_record), gfp);
+ return new->security ? 0 : -ENOMEM;
+}
+
+/**
+ * tt_cred_prepare - Allocate memory for new credentials.
+ *
+ * @new: Pointer to "struct cred".
+ * @old: Pointer to "struct cred".
+ * @gfp: Memory allocation flags.
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tt_cred_prepare(struct cred *new, const struct cred *old,
+ gfp_t gfp)
+{
+ if (tt_cred_alloc_blank(new, gfp))
+ return -ENOMEM;
+ strcpy(tt_find_record(new)->history, tt_find_record(old)->history);
+ return 0;
+}
+
+/**
+ * tt_cred_free - Release memory used by credentials.
+ *
+ * @cred: Pointer to "struct cred".
+ *
+ * Returns nothing.
+ */
+static void tt_cred_free(struct cred *cred)
+{
+ kfree(cred->security);
+}
+
+/**
+ * tt_cred_transfer - Transfer "struct tt_record" between credentials.
+ *
+ * @new: Pointer to "struct cred".
+ * @old: Pointer to "struct cred".
+ *
+ * Returns nothing.
+ */
+static void tt_cred_transfer(struct cred *new, const struct cred *old)
+{
+ strcpy(tt_find_record(new)->history, tt_find_record(old)->history);
+}
+
+/**
+ * tt_bprm_committing_creds - A hook which is called when do_execve() succeeded.
+ *
+ * @bprm: Pointer to "struct linux_binprm".
+ *
+ * Returns nothing.
+ */
+static void tt_bprm_committing_creds(struct linux_binprm *bprm)
+{
+ tt_update_record(tt_find_record(bprm->cred));
+}
+
+/**
+ * tt_task_getsecid - Check whether to audit or not.
+ *
+ * @p: Pointer to "struct task_struct".
+ * @secid: Pointer to flag.
+ */
+static void tt_task_getsecid(struct task_struct *p, u32 *secid)
+{
+ *secid = (p == current);
+}
+
+/**
+ * tt_secid_to_secctx - Allocate memory used for auditing.
+ *
+ * @secid: Bool flag to allocate.
+ * @secdata: Pointer to allocate memory.
+ * @seclen: Size of allocated memory.
+ *
+ * Returns 0 on success, -EINVAL otherwise.
+ */
+static int tt_secid_to_secctx(u32 secid, char **secdata, u32 *seclen)
+{
+ struct tt_record *record;
+ /* Ignore unless current thread's record is requested. */
+ if (secid != 1)
+ return -EINVAL;
+ /*
+ * We don't need to duplicate the string because current thread's
+ * record is updated upon only boot up and successful execve()
+ * operation, even if current thread's record is shared between
+ * multiple threads.
+ */
+ record = tt_find_record(current->real_cred);
+ *secdata = record->history;
+ *seclen = strlen(record->history);
+ return 0;
+}
+
+/* List of hooks. */
+static struct security_operations tasktracker_ops = {
+ .name = "tt",
+ .secid_to_secctx = tt_secid_to_secctx,
+ .task_getsecid = tt_task_getsecid,
+ .cred_prepare = tt_cred_prepare,
+ .cred_free = tt_cred_free,
+ .cred_alloc_blank = tt_cred_alloc_blank,
+ .cred_transfer = tt_cred_transfer,
+ .bprm_committing_creds = tt_bprm_committing_creds,
+};
+
+/**
+ * tt_init - Initialize this module.
+ *
+ * Returns 0 on success, panic otherwise.
+ */
+static int __init tt_init(void)
+{
+ struct cred *cred = (struct cred *) current_cred();
+ if (!security_module_enable(&tasktracker_ops))
+ return 0;
+ if (tt_cred_alloc_blank(cred, GFP_ATOMIC) ||
+ register_security(&tasktracker_ops))
+ panic("Failure registering TaskTracker");
+ tt_update_record(tt_find_record(cred));
+ pr_info("TaskTracker initialized\n");
+ return 0;
+}
+
+security_initcall(tt_init);
--
1.7.1
9 years, 11 months
peculiar disappearance of most audit rules
by Peter Grandi
Hi, I have started using 'auditd', mostly to monitor various directories
where packages get installed to check for changes in their contents,
with rules like:
-w /bin -p wa -k pkg-s
-w /boot -p wa -k pkg-s
-w /etc -p wa -k pkg-s
-w /lib -p wa -k pkg-s
-w /lib32 -p wa -k pkg-s
-w /lib64 -p wa -k pkg-s
-w /opt -p wa -k pkg-s
-w /usr -p wa -k pkg-s
-w /fs/sozan/loc -p wa -k pkg-l
-w /fs/sozan/loc32-el5 -p wa -k pkg-l
-w /fs/sozan/loc64-u12 -p wa -k pkg-l
-w /fs/sozan/com -p wa -k pkg-l
-w /fs/sozan/com32-el5 -p wa -k pkg-l
-w /fs/sozan/com64-u12 -p wa -k pkg-l
After setting them, I can verify that for example creating, updating and
deleting a file in '/boot' or '/opt' gets reported.
Wheat then happens is that even if I set 'auditctl -e 2' some of the
rules disappear, usually at around the same time as 'cron.daily' scripts
run, and some more disappear later. This usually seems to relate to
times where there some significant IO activity ('mlocate' scan, backup),
but this is a guess.
For example:
time->Thu Apr 17 07:58:44 2014
type=CONFIG_CHANGE msg=audit(1397717924.255:37148): op="remove rule" dir="/boot" key="pkg-s" list=4 res=1
time->Thu Apr 17 07:59:04 2014
type=CONFIG_CHANGE msg=audit(1397717944.762:37151): op="remove rule" dir="/opt" key="pkg-s" list=4 res=1
time->Thu Apr 17 10:01:02 2014
type=CONFIG_CHANGE msg=audit(1397725262.301:37157): op="remove rule" dir="/fs/sozan/loc64-u12" key="pkg-l" list=4 res=1
time->Thu Apr 17 10:01:02 2014
type=CONFIG_CHANGE msg=audit(1397725262.301:37156): op="remove rule" dir="/fs/sozan/loc32-el5" key="pkg-l" list=4 res=1
There is no equivalent line in 'dmesg'.
I understand that the 'audit' kernel modules may remove rules if they
refer to invalid paths, but all the relevant directories do exist, as
for example '/boot' and '/opt' are the standard usual directories in the
"root" tree itself:
$ ls -ldn /boot /opt /fs/sozan/loc64-u12 /fs/sozan/loc32-el5
drwxr-xr-x 3 0 0 4096 Apr 21 07:22 /boot
drwxrwsr-x 7 1 1 61 Jul 30 2011 /fs/sozan/loc32-el5
drwxrwsr-x 5 1 1 39 Oct 4 2011 /fs/sozan/loc64-u12
drwxr-xr-x 7 0 0 4096 Apr 20 14:52 /opt
$ df /boot/. /opt/. /fs/sozan/loc64-u12/. /fs/sozan/loc32-el5/.
Filesystem 1M-blocks Used Available Use% Mounted on
/dev/sda3 24815 16853 4106 81% /
/dev/sda3 24815 16853 4106 81% /
/dev/sda6 90048 82355 7694 92% /fs/sozan
/dev/sda6 90048 82355 7694 92% /fs/sozan
This is happening on two similarly configured Ubuntu 12.04 systems with
both 3.2 and 3.11 Ubuntu "official" kernels. I also have an AppArmor
configuration which seem to trigger bugs in AppArmor, but all the
relative profiles are essentially unchanged.
Eventually around almost all of the rules I have set "disappear". For
example of all these rules:
LIST_RULES: exit,always dir=/fs/sozan/search (0x10) perm=r key=pkg-r
LIST_RULES: exit,always dir=/fs/sozan/mlocate (0x11) perm=r key=pkg-r
....
LIST_RULES: exit,always dir=/bin (0x4) perm=wa key=pkg-s
LIST_RULES: exit,always dir=/boot (0x5) perm=wa key=pkg-s
LIST_RULES: exit,always dir=/etc (0x4) perm=wa key=pkg-s
LIST_RULES: exit,always dir=/lib (0x4) perm=wa key=pkg-s
LIST_RULES: exit,always dir=/lib32 (0x6) perm=wa key=pkg-s
LIST_RULES: exit,always dir=/lib64 (0x6) perm=wa key=pkg-s
LIST_RULES: exit,always dir=/opt (0x4) perm=wa key=pkg-s
LIST_RULES: exit,always dir=/usr (0x4) perm=wa key=pkg-s
LIST_RULES: exit,always dir=/fs/sozan/loc (0xd) perm=wa key=pkg-l
LIST_RULES: exit,always dir=/fs/sozan/loc32-el5 (0x13) perm=wa key=pkg-l
LIST_RULES: exit,always dir=/fs/sozan/loc64-u12 (0x13) perm=wa key=pkg-l
LIST_RULES: exit,always dir=/fs/sozan/com (0xd) perm=wa key=pkg-l
LIST_RULES: exit,always dir=/fs/sozan/com32-el5 (0x13) perm=wa key=pkg-l
LIST_RULES: exit,always dir=/fs/sozan/com64-u12 (0x13) perm=wa key=pkg-l
Only the first two have not "disappeared" on one of the systems.
This is rather peculiar, please let me know if it is a configuration
error, an issue, and any fixes or workaround if available (other than
running 'auditctl -R /etc/audit/audit.rules' every few minutes via CRON).
10 years, 1 month
[PATCH] netlink: have netlink per-protocol bind function return an error code.
by Richard Guy Briggs
Have the netlink per-protocol optional bind function return an int error code
rather than void to signal a failure.
This will enable netlink protocols to perform extra checks including
capabilities and permissions verifications when updating memberships in
multicast groups.
In netlink_bind() and netlink_setsockopt() the call to the per-protocol bind
function was moved above the multicast group update to prevent any access to
the multicast socket groups before checking with the per-protocol bind
function. This will enable the per-protocol bind function to be used to check
permissions which could be denied before making them available, and to avoid
the messy job of undoing the addition should the per-protocol bind function
fail.
The netfilter subsystem seems to be the only one currently using the
per-protocol bind function.
Signed-off-by: Richard Guy Briggs <rgb(a)redhat.com>
---
In particular, the audit subsystem (NETLINK_AUDIT protocol) could benefit by
being able to check specific capabilities for each multicast group before
granting membership to the requesting socket. Currently, all NETLINK_AUDIT
sockets must have the capability CAP_NET_ADMIN. No other capabilities are
required to join a multicast group. This capability is too broad allowing
access to this socket by many applications that must not have access to this
information. It is proposed to add capability CAP_AUDIT_READ to allow this
access while dropping the exessively broad capability CAP_NET_ADMIN.
There has also been some interest expressed by IETF ForCES folk.
---
include/linux/netlink.h | 2 +-
net/netfilter/nfnetlink.c | 3 ++-
net/netlink/af_netlink.c | 30 +++++++++++++++++-------------
net/netlink/af_netlink.h | 4 ++--
4 files changed, 22 insertions(+), 17 deletions(-)
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 7a6c396..4402653 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -45,7 +45,7 @@ struct netlink_kernel_cfg {
unsigned int flags;
void (*input)(struct sk_buff *skb);
struct mutex *cb_mutex;
- void (*bind)(int group);
+ int (*bind)(int group);
bool (*compare)(struct net *net, struct sock *sk);
};
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 75619f9..10a4cf5 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -392,7 +392,7 @@ static void nfnetlink_rcv(struct sk_buff *skb)
}
#ifdef CONFIG_MODULES
-static void nfnetlink_bind(int group)
+static int nfnetlink_bind(int group)
{
const struct nfnetlink_subsystem *ss;
int type = nfnl_group2type[group];
@@ -403,6 +403,7 @@ static void nfnetlink_bind(int group)
if (!ss) {
request_module("nfnetlink-subsys-%d", type);
}
+ return 0;
}
#endif
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index bca50b9..4224dc5 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1198,7 +1198,7 @@ static int netlink_create(struct net *net, struct socket *sock, int protocol,
struct module *module = NULL;
struct mutex *cb_mutex;
struct netlink_sock *nlk;
- void (*bind)(int group);
+ int (*bind)(int group);
int err = 0;
sock->state = SS_UNCONNECTED;
@@ -1441,6 +1441,17 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr,
if (!nladdr->nl_groups && (nlk->groups == NULL || !(u32)nlk->groups[0]))
return 0;
+ if (nlk->netlink_bind && nladdr->nl_groups) {
+ int i;
+
+ for (i = 0; i < nlk->ngroups; i++)
+ if (test_bit(i, (long unsigned int *)&nladdr->nl_groups)) {
+ err = nlk->netlink_bind(i);
+ if (err)
+ return err;
+ }
+ }
+
netlink_table_grab();
netlink_update_subscriptions(sk, nlk->subscriptions +
hweight32(nladdr->nl_groups) -
@@ -1449,15 +1460,6 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr,
netlink_update_listeners(sk);
netlink_table_ungrab();
- if (nlk->netlink_bind && nlk->groups[0]) {
- int i;
-
- for (i=0; i<nlk->ngroups; i++) {
- if (test_bit(i, nlk->groups))
- nlk->netlink_bind(i);
- }
- }
-
return 0;
}
@@ -2095,14 +2097,16 @@ static int netlink_setsockopt(struct socket *sock, int level, int optname,
return err;
if (!val || val - 1 >= nlk->ngroups)
return -EINVAL;
+ if (nlk->netlink_bind) {
+ err = nlk->netlink_bind(val);
+ if (err)
+ return err;
+ }
netlink_table_grab();
netlink_update_socket_mc(nlk, val,
optname == NETLINK_ADD_MEMBERSHIP);
netlink_table_ungrab();
- if (nlk->netlink_bind)
- nlk->netlink_bind(val);
-
err = 0;
break;
}
diff --git a/net/netlink/af_netlink.h b/net/netlink/af_netlink.h
index acbd774..0edb8d5 100644
--- a/net/netlink/af_netlink.h
+++ b/net/netlink/af_netlink.h
@@ -37,7 +37,7 @@ struct netlink_sock {
struct mutex *cb_mutex;
struct mutex cb_def_mutex;
void (*netlink_rcv)(struct sk_buff *skb);
- void (*netlink_bind)(int group);
+ int (*netlink_bind)(int group);
struct module *module;
#ifdef CONFIG_NETLINK_MMAP
struct mutex pg_vec_lock;
@@ -73,7 +73,7 @@ struct netlink_table {
unsigned int groups;
struct mutex *cb_mutex;
struct module *module;
- void (*bind)(int group);
+ int (*bind)(int group);
bool (*compare)(struct net *net, struct sock *sock);
int registered;
};
--
1.7.1
10 years, 2 months
[PATCH 1/7] audit: implement generic feature setting and retrieving
by Eric Paris
The audit_status structure was not designed with extensibility in mind.
Define a new AUDIT_SET_FEATURE message type which takes a new structure
of bits where things can be enabled/disabled/locked one at a time. This
structure should be able to grow in the future while maintaining forward
and backward compatibility (based loosly on the ideas from capabilities
and prctl)
This does not actually add any features, but is just infrastructure to
allow new on/off types of audit system features.
Signed-off-by: Eric Paris <eparis(a)redhat.com>
---
include/linux/audit.h | 2 +
include/uapi/linux/audit.h | 16 +++++++
kernel/audit.c | 110 ++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 127 insertions(+), 1 deletion(-)
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 729a4d1..7b31bec 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -73,6 +73,8 @@ struct audit_field {
void *lsm_rule;
};
+extern int is_audit_feature_set(int which);
+
extern int __init audit_register_class(int class, unsigned *list);
extern int audit_classify_syscall(int abi, unsigned syscall);
extern int audit_classify_arch(int arch);
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index b7cb978..a053243 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -68,6 +68,9 @@
#define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */
#define AUDIT_TTY_GET 1016 /* Get TTY auditing status */
#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */
+#define AUDIT_SET_FEATURE 1018 /* Turn an audit feature on or off */
+#define AUDIT_GET_FEATURE 1019 /* Get which features are enabled */
+#define AUDIT_FEATURE_CHANGE 1020 /* audit log listing feature changes */
#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */
#define AUDIT_USER_AVC 1107 /* We filter this differently */
@@ -369,6 +372,19 @@ struct audit_status {
__u32 backlog; /* messages waiting in queue */
};
+struct audit_features {
+#define AUDIT_FEATURE_VERSION 1
+ __u32 vers;
+ __u32 mask; /* which bits we are dealing with */
+ __u32 features; /* which feature to enable/disable */
+ __u32 lock; /* which features to lock */
+};
+
+#define AUDIT_LAST_FEATURE -1
+
+#define audit_feature_valid(x) ((x) >= 0 && (x) <= AUDIT_LAST_FEATURE)
+#define AUDIT_FEATURE_TO_MASK(x) (1 << ((x) & 31)) /* mask for __u32 */
+
struct audit_tty_status {
__u32 enabled; /* 1 = enabled, 0 = disabled */
__u32 log_passwd; /* 1 = enabled, 0 = disabled */
diff --git a/kernel/audit.c b/kernel/audit.c
index f2f4666..3acbbc8 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -140,6 +140,15 @@ static struct task_struct *kauditd_task;
static DECLARE_WAIT_QUEUE_HEAD(kauditd_wait);
static DECLARE_WAIT_QUEUE_HEAD(audit_backlog_wait);
+static struct audit_features af = {.vers = AUDIT_FEATURE_VERSION,
+ .mask = -1,
+ .features = 0,
+ .lock = 0,};
+
+static char *audit_feature_names[0] = {
+};
+
+
/* Serialize requests from userspace. */
DEFINE_MUTEX(audit_cmd_mutex);
@@ -584,6 +593,8 @@ static int audit_netlink_ok(struct sk_buff *skb, u16 msg_type)
return -EOPNOTSUPP;
case AUDIT_GET:
case AUDIT_SET:
+ case AUDIT_GET_FEATURE:
+ case AUDIT_SET_FEATURE:
case AUDIT_LIST_RULES:
case AUDIT_ADD_RULE:
case AUDIT_DEL_RULE:
@@ -628,6 +639,94 @@ static int audit_log_common_recv_msg(struct audit_buffer **ab, u16 msg_type)
return rc;
}
+int is_audit_feature_set(int i)
+{
+ return af.features & AUDIT_FEATURE_TO_MASK(i);
+}
+
+
+static int audit_get_feature(struct sk_buff *skb)
+{
+ u32 seq;
+
+ seq = nlmsg_hdr(skb)->nlmsg_seq;
+
+ audit_send_reply(NETLINK_CB(skb).portid, seq, AUDIT_GET, 0, 0,
+ &af, sizeof(af));
+
+ return 0;
+}
+
+static void audit_log_feature_change(int which, u32 old_feature, u32 new_feature,
+ u32 old_lock, u32 new_lock, int res)
+{
+ struct audit_buffer *ab;
+
+ ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_FEATURE_CHANGE);
+ audit_log_format(ab, "feature=%s new=%d old=%d old_lock=%d new_lock=%d res=%d",
+ audit_feature_names[which], !!old_feature, !!new_feature,
+ !!old_lock, !!new_lock, res);
+ audit_log_end(ab);
+}
+
+static int audit_set_feature(struct sk_buff *skb)
+{
+ struct audit_features *uaf;
+ int i;
+
+ BUILD_BUG_ON(AUDIT_LAST_FEATURE + 1 > sizeof(audit_feature_names)/sizeof(audit_feature_names[0]));
+ uaf = nlmsg_data(nlmsg_hdr(skb));
+
+ /* if there is ever a version 2 we should handle that here */
+
+ for (i = 0; i <= AUDIT_LAST_FEATURE; i++) {
+ u32 feature = AUDIT_FEATURE_TO_MASK(i);
+ u32 old_feature, new_feature, old_lock, new_lock;
+
+ /* if we are not changing this feature, move along */
+ if (!(feature & uaf->mask))
+ continue;
+
+ old_feature = af.features & feature;
+ new_feature = uaf->features & feature;
+ new_lock = (uaf->lock | af.lock) & feature;
+ old_lock = af.lock & feature;
+
+ /* are we changing a locked feature? */
+ if ((af.lock & feature) && (new_feature != old_feature)) {
+ audit_log_feature_change(i, old_feature, new_feature,
+ old_lock, new_lock, 0);
+ return -EPERM;
+ }
+ }
+ /* nothing invalid, do the changes */
+ for (i = 0; i <= AUDIT_LAST_FEATURE; i++) {
+ u32 feature = AUDIT_FEATURE_TO_MASK(i);
+ u32 old_feature, new_feature, old_lock, new_lock;
+
+ /* if we are not changing this feature, move along */
+ if (!(feature & uaf->mask))
+ continue;
+
+ old_feature = af.features & feature;
+ new_feature = uaf->features & feature;
+ old_lock = af.lock & feature;
+ new_lock = (uaf->lock | af.lock) & feature;
+
+ if (new_feature != old_feature)
+ audit_log_feature_change(i, old_feature, new_feature,
+ old_lock, new_lock, 1);
+
+ if (new_feature)
+ af.features |= feature;
+ else
+ af.features &= ~feature;
+ af.lock |= new_lock;
+ }
+
+ return 0;
+}
+
static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
{
u32 seq;
@@ -699,7 +798,16 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT)
err = audit_set_backlog_limit(status_get->backlog_limit);
break;
- case AUDIT_USER:
+ case AUDIT_GET_FEATURE:
+ err = audit_get_feature(skb);
+ if (err)
+ return err;
+ break;
+ case AUDIT_SET_FEATURE:
+ err = audit_set_feature(skb);
+ if (err)
+ return err;
+ break;
case AUDIT_FIRST_USER_MSG ... AUDIT_LAST_USER_MSG:
case AUDIT_FIRST_USER_MSG2 ... AUDIT_LAST_USER_MSG2:
if (!audit_enabled && msg_type != AUDIT_USER_AVC)
--
1.8.2.1
10 years, 4 months
[PATCH V3 0/6] namespaces: log namespaces per task
by Richard Guy Briggs
The purpose is to track namespaces in use by logged processes from the
perspective of init_*_ns.
1/6 defines a function to generate them and assigns them.
Use a serial number per namespace (unique across one boot of one kernel)
instead of the inode number (which is claimed to have had the right to change
reserved and is not necessarily unique if there is more than one proc fs). It
could be argued that the inode numbers have now become a defacto interface and
can't change now, but I'm proposing this approach to see if this helps address
some of the objections to the earlier patchset.
2/6 adds access functions to get to the serial numbers in a similar way to
inode access for namespace proc operations.
3/6 implements, as suggested by Serge Hallyn, making these serial numbers
available in /proc/self/ns/{ipc,mnt,net,pid,user,uts}_snum. I chose "snum"
instead of "seq" for consistency with inum and there are a number of other uses
of "seq" in the namespace code.
4/6 exposes proc's ns entries structure which lists a number of useful
operations per namespace type for other subsystems to use.
5/6 provides an example of usage for audit_log_task_info() which is used by
syscall audits, among others. audit_log_task() and audit_common_recv_message()
would be other potential use cases.
Proposed output format:
This differs slightly from Aristeu's patch because of the label conflict with
"pid=" due to including it in existing records rather than it being a seperate
record. The serial numbers are printed in hex.
type=SYSCALL msg=audit(1399651071.433:72): arch=c000003e syscall=272 success=yes exit=0 a0=40000000 a1=ffffffffffffffff a2=0 a3=22 items=0 ppid=1 pid=483 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="(t-daemon)" exe="/usr/lib/systemd/systemd" netns=97 utsns=2 ipcns=1 pidns=4 userns=3 mntns=5 subj=system_u:system_r:init_t:s0 key=(null)
6/6 tracks the creation and deletion of of namespaces, listing the type of
namespace instance, related namespace id if there is one and the newly minted
serial number.
Proposed output format:
type=NS_INIT msg=audit(1400217435.706:94): pid=524 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:mount_t:s0 type=20000 old_snum=0 snum=a1 res=1
type=NS_DEL msg=audit(1400217435.730:95): pid=524 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:mount_t:s0 type=20000 snum=a1 res=1
v2 -> v3:
Use atomic64_t in ns_serial to simplify it.
Avoid funciton duplication in proc, keying on dentry.
Squash down audit patch to avoid rcu sleep issues.
Add tracking for creation and deletion of namespace instances.
v1 -> v2:
Avoid rollover by switching from an int to a long long.
Change rollover behaviour from simply avoiding zero to raising a BUG.
Expose serial numbers in /proc/<pid>/ns/*_snum.
Expose ns_entries and use it in audit.
Notes:
There has been some progress made for audit in net namespaces and pid
namespaces since this previous thread. net namespaces are now served as peers
by one auditd in the init_net namespace with processes in a non-init_net
namespace being able to write records if they are in the init_user_ns and have
CAP_AUDIT_WRITE. Processes in a non-init_pid_ns can now similarly write
records. As for CAP_AUDIT_READ, I just posted a patchset to check capabilities
of userspace processes that try to join netlink broadcast groups.
This set does not try to solve the non-init namespace audit messages and
auditd problem yet. That will come later, likely with additional auditd
instances running in another namespace with a limited ability to influence the
master auditd. I echo Eric B's idea that messages destined for different
namespaces would have to be tailored for that namespace with references that
make sense (such as the right pid number reported to that pid namespace, and
not leaking info about parents or peers).
Bugs:
Patch 6/6 has a timing bug such that mnt and net namespace initial namespaces
never get logged, I suspect because they are initialized before the audit
subsystem. I've tried moving audit from __initcall to subsys_initcall, but
that doesn't help.
Questions:
Is there a way to link serial numbers of namespaces involved in migration of a
container to another kernel? It sounds like what is needed is a part of a
mangement application that is able to pull the audit rcords from constituent
hosts to build an audit trail of a container.
What additional events should list this information?
Does this present any problematic information leaks? Only CAP_AUDIT_CONTROL
(and proposed CAP_AUDIT_READ) in init_user_ns can get to this information in
the init namespace at the moment from audit. *However*, the addition of the
proc/<pid>/ns/*_snum does make it available to other processes now.
Richard Guy Briggs (6):
namespaces: assign each namespace instance a serial number
namespaces: expose namespace instance serial number in proc_ns_operations
namespaces: expose ns instance serial numbers in proc
namespaces: expose ns_entries
audit: log namespace serial numbers
audit: log creation and deletion of namespace instances
fs/mount.h | 1 +
fs/namespace.c | 12 +++++++++
fs/proc/namespaces.c | 35 +++++++++++++++++++-------
include/linux/audit.h | 15 +++++++++++
include/linux/ipc_namespace.h | 1 +
include/linux/nsproxy.h | 8 ++++++
include/linux/pid_namespace.h | 1 +
include/linux/proc_ns.h | 2 +
include/linux/user_namespace.h | 1 +
include/linux/utsname.h | 1 +
include/net/net_namespace.h | 1 +
include/uapi/linux/audit.h | 2 +
init/version.c | 1 +
ipc/msgutil.c | 1 +
ipc/namespace.c | 20 +++++++++++++++
kernel/audit.c | 53 +++++++++++++++++++++++++++++++++++++++-
kernel/nsproxy.c | 17 +++++++++++++
kernel/pid.c | 1 +
kernel/pid_namespace.c | 19 ++++++++++++++
kernel/user.c | 1 +
kernel/user_namespace.c | 18 +++++++++++++
kernel/utsname.c | 20 +++++++++++++++
net/core/net_namespace.c | 20 ++++++++++++++-
23 files changed, 240 insertions(+), 11 deletions(-)
10 years, 4 months
[PATCH] arm64: audit: Fix build for audit changes
by Mark Brown
From: Mark Brown <broonie(a)linaro.org>
Commit 3efe33f5d2 (audit: x86: drop arch from __audit_syscall_entry()
interface) removed the arch parameter from __audit_syscall_entry() and
updated the only current user in mainline but this breaks the ARMv8 audit
code that has been added in -next. Fix this by making the equivalent
update to ARMv8.
Signed-off-by: Mark Brown <broonie(a)linaro.org>
---
arch/arm64/kernel/ptrace.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 70526cfda056..310842e3d477 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1115,8 +1115,8 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs)
if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
trace_sys_enter(regs, regs->syscallno);
- audit_syscall_entry(syscall_get_arch(), regs->syscallno,
- regs->orig_x0, regs->regs[1], regs->regs[2], regs->regs[3]);
+ audit_syscall_entry(regs->syscallno, regs->orig_x0, regs->regs[1],
+ regs->regs[2], regs->regs[3]);
return regs->syscallno;
}
--
2.0.1
10 years, 4 months
Re: RHEL 6 audit.rules question
by Dan White
On Jul 30, 2014, at 04:33 PM, Steve Grubb <sgrubb(a)redhat.com> wrote:
> On Wednesday, July 30, 2014 08:21:45 PM Dan White wrote:
> > Does the system allow for the import/include of groups of rules in other
> > files - like logrotate and /etc/logrotate.d/* ?
>
> No, but in 2.3 and later there is a /etc/audit/rules.d/ directory where rules
> can be dropped off. The augenrules utility will "compile" those into a master
> audit.rules file. You also have to enable augenrules by setting
> USE_AUGENRULES="yes" in /etc/sysconfig/audit. that is about as close as it
> comes.
>
> -Steve
Thanks for the quick answer.
Any plans to release 2.3.x to RHEL 6 that can be shared ?
“Sometimes I think the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us.” (Bill Waterson: Calvin & Hobbes)
10 years, 4 months
